PFF - Pennock's Fiero Forum, PDA Edition

Greengoblin's Build Thread! (Page 5/12)

greengoblin0129

JUN 07, 10:11 PM

Did a ton of work on the car today, mostly fixing basic problems with the car. First thing I did to the car was replace the fuel pump and filter. Wasn't to hard to do, I had just replaced it 6 months ago so the bolts came right off. Plus I was on E so there was no weight to the tank. After that I fixed all my lighting issues. Had a bad wire from the head light switch to the fuse box, and a ton of bulbs out. Replaced most of the bulbs and it still wasn't working right. Ended up being a lot of bad socket I so I just swapped out the wiring harness and fixed some corroded sockets. Also got my front bumper on today, and took it for a cruise

Heres the pics!
Front bumper on the car:

Took the tail lights to fix the lighting issues and back bumer off (have to fix some things on the bumper,going back on tomorrow)

Car at night (still need to put in the middle lights)

------------------

87GT 5speed, 84SE Auto, 85GT(parts), 85SE 5speed,
86SE 2.8, 86GT 5speed, 87GT auto.
http://www.cardomain.com/ride/2215614/3
My build thread:
[URL=http://www.fiero.nl/forum/Forum1/HTML/059538.html [/URL]

[This message has been edited by greengoblin0129 (edited 06-07-2006).]

greengoblin0129

JUN 08, 12:49 AM

Heres the bags i'll be running, Slam Specialties:

http://www.suicidedoors.com/SlamSpecialtiesRE200PSISinglePort.php
Should be complete by this time next week if everything goes as planned!!!

[This message has been edited by greengoblin0129 (edited 06-08-2006).]

88White3.4GT

JUN 08, 02:57 AM

why does it look like the headlights dont come up all the way? =0

greengoblin0129

JUN 08, 10:25 AM

quote

Originally posted by 88White3.4GT:

why does it look like the headlights dont come up all the way? =0

I was trying to fix all my lights with the car off and the battery was really low. So when I hit the headlight switch they didn't come up all the way.

greengoblin0129

JUN 08, 09:53 PM

Had another Fiero owner stop by to check out an engine block I have because his is in pretty bad shape right now. Because he didn't have a Fiero to drive, he had to drive his work vehicle to my house...a Hummer limo

Thing was Bad A$$
Also got my buddies Camaro finally running as well, been sitting for 3 years:

Then I finally had some time to work on my engine bay and clean it up, cleaned up the frame:

[This message has been edited by greengoblin0129 (edited 06-08-2006).]

greengoblin0129

JUN 12, 06:06 PM

UPDATE: Well I drove 2 hours today to pick up my bags, and you would know they made a mistake and didn't order them

Ended up buying them off suicidedoors.com and got a better deal. Now I just have to wait a couple days for shipping. Trying to get the air ride up and running by the end of this week! Tomorrow i'll be replacing my axles, harmonic balancer, and setting the timing.

Sig test...

------------------
http://www.cardomain.com/ride/2215614/3
My build thread:
[URL=http://www.fiero.nl/forum/Forum1/HTML/059538.html [/URL]

greengoblin0129

JUN 13, 10:11 PM

I relized I'm not going to have time for the paint job I want due to time. Therefore i'm just going to do a raddle can paint job on the parts that need it the most. Hopfully i'll have a paint job before Fierorama. I went a head and fixed a nice size crack and a coupld chips in the top clip today and repainted it. Heres some pics:
Filled in crack with fiberglass then body putty: