FieroGT stretch Concept (Page 44/240)
Amida FEB 20, 03:39 PM
The sun came out just in time for one last wet check with alcohol before priming. Looks like a go.
x
86_fiero_gt_92 FEB 20, 04:17 PM

quote
Originally posted by Amida:


That's cool. Is this your Fiero project? Does someone already make that rear spoiler?



no this is just something i made up when i didn't have anything to do, when i was little i would always draw those kind of spoilers
whadeduck FEB 20, 04:30 PM
What did you finally end up using for turn signals?

------------------
Whade' "The Duck Formerly Known As Wade" Duck
'87 GT Auto
'88 Ferrario
'84 Indy

Amida FEB 20, 06:08 PM

quote
Originally posted by whadeduck:

What did you finally end up using for turn signals?




As is, the 355 & Ford Scorpion lights will do, or if you tell me in advance I can make the holes smaller for the Sebring or Jeep Liberty. The Liberty has a better installed angle & uses two bulbs.
x


[This message has been edited by Amida (edited 02-20-2008).]

whadeduck FEB 20, 06:45 PM
Don't know why, but I'm partial to the amber lights.

------------------
Whade' "The Duck Formerly Known As Wade" Duck
'87 GT Auto
'88 Ferrario
'84 Indy

Amida FEB 20, 09:10 PM

quote
Originally posted by whadeduck:

Don't know why, but I'm partial to the amber lights.



All lights are available in amber as well. I like the clear with amber bulbs used as daytime driving lights.
blkcofy FEB 20, 10:13 PM


Amida, I know this is still work in progress, but do you have a ballpark figure you're shooting for in terms of cost for the Fi355 nose?
88White3.4GT FEB 20, 11:38 PM

quote
Originally posted by Amida:

Is that a flame job on your car? Got a bigger pic?




It's a photoshop of a paint scheme i'm thinking of.

Amida FEB 20, 11:47 PM

quote
Originally posted by blkcofy:



Amida, I know this is still work in progress, but do you have a ballpark figure you're shooting for in terms of cost for the Fi355 nose?



Blk, From a cost/labor standpoint it would have been more economical to just do the one piece, but I just had to do the factory component look which I thought would be cool. I'm estimating that It'll be US$525 + s/h for the new nose. I'll have a better idea once I do a time trial, & now I'm wondering how much time I have in it so far ? Hmmmm.....
Amida FEB 22, 10:16 AM
While waiting for primer to dry I thought I'd throw some meat on the Formula to see how to do lowcost fender flares. Pretty beefy huh? Porsche (5x130) Cromodora Sin wheels 8.5x18f x235x40 , 10x18r x275x35 . Gotta lower the ride height just a tad & maybe replace the go-cart brakes. With the wider width & high offsets the 1" adapters put the wheel centerlines back pretty close to the stock wheel centerline with about 1/2"f / 3/4"r suspension clearance...that's about as far in as it will go. Pretty wild. Last post for a while...too much work to do.
x