"concept GTR" dash build-up...Fie Ro style! ;) (Page 42/56) Fie Ro JUL 30, 06:45 PM I have lost a lot of time but starting to catch up The midconsole is almost ready...the sub housing took a lot of time. Still needs a little tweaking and final paint but its close to be considered finished...lol Went to a local meeting today so I put everything roughly in place this morning cire36 JUL 30, 10:32 PM Do you have anything planned for the drivers side? Fantastic work man. yellowstone JUL 31, 07:42 AM Very very nice. I'm looking forward to seeing the interior in person soon. Are you coming over for the tranny before the meet? Tusch JUL 31, 09:34 AM I doubt you have hooked it up yet, but definately want to know how the sub sounds in that position. Also, are you still working on a new gauge surround or are you just going to modify the stock one because of all the difficulties you ran into. Fie Ro JUL 31, 03:50 PM quote Originally posted by cire36: Do you have anything planned for the drivers side? Fantastic work man. It will get the same sidevent setup and a new instrument cluster, more about that in the last reply below...thanks quote Originally posted by yellowstone: Very very nice. I'm looking forward to seeing the interior in person soon. Are you coming over for the tranny before the meet? I should get several days off soon so I hope I can make it before the meeting. I had to replace a non-replace-able heater tube and fitting last week (started leaking bad) but the fiero runs fine and cool as usual ...hmm Autobahn hmmm quote Originally posted by Tusch: I doubt you have hooked it up yet, but definately want to know how the sub sounds in that position. Also, are you still working on a new gauge surround or are you just going to modify the stock one because of all the difficulties you ran into. It isnt hooked up yet, I am also redoing the amp/cd changer rack so most of the system is disconnected. I ran the Boston sub in my first box in the same location, it had a tight bass and good sound quality...using the same speaker for this box. The instrument cluster has become one of the last items to think about...still havent looked much into the TT cluster wiring to make it work with the stock housing. If it doesnt work I will go with seperate aftermarket gauges... a bit like this...but different ducattiman JUL 31, 05:34 PM lol,,,u call that wee-wee small thing bass... Fiero1Fan JUL 31, 05:39 PM With the right music his right arm will be rubber in 10 minutes!! ducattiman JUL 31, 07:24 PM quote Originally posted by Fiero1Fan: With the right music his right arm will be rubber in 10 minutes!! lmao maybe a little numb but not rubber Oversteer AUG 11, 12:55 PM quote Originally posted by Mister: Fie Ro, no words...It's all been said B4, just a tip of the 'chapeau'. You've been in Montreal too long hahaha. But I guess you can't beat the bagels, poutine, ladies, and well I could go on for days. hahaha This car is shaping up to be the nicest Fiero on this Forum and maybe this planet? haha Respectful designs, and no cheese (or fromage if you will) ricer mods like useless scoopes and under car lighting. Keep up the good work, this thread is an inspriation to start yet another one of my failed projects Fie Ro AUG 14, 04:56 PM Sorry I am slow at posting updates.....so...more on the doorpanel pieces : ..Didnt like all the inward curves so I did some reshaping to give it more "body" where needed I am using glasbubbles/microballoons more and more as a filler here because it bonds real good to fiberglass (same resin), lightweight and easy to sand Before cutting the armrest and box door I made a mold, setting up first layer of glass etc... I left some extra edge material before taking the mold, now I can trim the original panel to make it fit.