 
     |
| newest project (Page 32/312) |
|
OH10fiero
|
MAR 19, 01:27 AM
|
|
|
bubbajoexxx, are the adaptors the same for front and back? Are you useing a e-break design for the rears on your car? since you did not say I was currious
|
|
|
|
crzyone
|
MAR 19, 02:27 AM
|
|
|
Thanks Joe! I would really appreciate step by step instructions with pictures, if I could give you more ++ I would.
|
|
|
Fierofreak00
|
MAR 19, 07:24 AM
|
|
| quote | | Originally posted by crzyone: Thanks Joe! I would really appreciate step by step instructions with pictures, if I could give you more ++ I would. |
|
Yeah! I agree this would be a dandy idea!
|
|
|
|
PURPLE REIGN
|
MAR 19, 09:42 AM
|
|
| quote | | Originally posted by mattm: OK, i am definately going to ry this. One more question: what do i do about the hubs? Do i cut down the stock ones? Thank you, Matt |
|
Or you find someone like myself who makes those hubs for $60 a pair 
|
|
|
|
bubbajoexxx
|
MAR 19, 10:20 AM
|
|
OH10fiero
the rear will be done as a multi caliper setup with a small mecanical rear caliper unless I can find a set of 95 to 2000 rear vette calipers as the rear upright must have the old brake setup completely remved and a new adapter that mounts under the wheel bearing installed to hold every thing will post pics of every aspect of the rear vette swap including the diagrams with diamentions
|
|
|
|
bubbajoexxx
|
MAR 19, 10:25 AM
|
|
PURPLE REIGN
thats is a more than resonableprice to cut rotors down I would recomend you +
|
|
|
|
OH10fiero
|
MAR 19, 05:05 PM
|
|
Second question since I forgot to ask last post. On the concentric ring, did you fabricate that as well, or are you just useing something similar to a washer for this?
Looks more like you would have to make that ring than just find something like that happend to be in your tool box.
|
|
|
|
bubbajoexxx
|
MAR 19, 05:19 PM
|
|
|
|
|
crzyone
|
MAR 19, 05:28 PM
|
|
|
Thanks Joe! I have a question. What exactly is a cut down rotor? Is it a stock fiero rotor with the braking surface cut off and just the hub left? This is then placed inside the corvette rotor and new bolt holes must be drilled in the rotor for the fiero boltpattern? I think I just answered my own questions. Great pictures, where did you buy your rotors and calipers from? Thanks Again [This message has been edited by crzyone (edited 03-19-2004).]
|
|
|
|
bubbajoexxx
|
MAR 19, 05:28 PM
|
|
OH10fiero
had them made $25.00for 4 2 front 2 rear as they are differant sizes
|
|
|
