quote Originally posted by ace5514: that is sweet! i checked out the other vids on this one too. The paint looks like glass....You gonna drive her soon?

I doubt it due to the weather and all, but in town maybe, but I seriously need to have installed a roller scrap bar in the front. I don't want to damage all the work that was put into the nose. I got in late yesterday right before the shop closed to inspect the car. I saw a few areas that needed more TLC. I took this brief video, but it was getting dark outside.

http://www.youtube.com/watc...KXKL5YWVSoFx75Qb4OTA


Problem areas: yellow tape





The shop is coming back to paint the black window railing.


They did install the front and rear grills.



SEMA link. Lost of good ideas there.
http://www.fiero.nl/forum/F...6/HTML/060802-6.html

[This message has been edited by madcurl (edited 11-07-2012).]

I stopped by the detail shop and went crazy with the green tape. A few areas need more attention. Over-all the car looks good, but not good enough. I give it another two weeks before completion. I did drop off the "beautification" kit for the engine compartment. I'm going to need to chrome those strut tower plates.

Things to do:

1. Install the rear wheel wells.
2. Install the side, rear, and hood vent screens.
3. Fix minor defects where the green strips of tape are located.

I sent pics to 4.9 from my iPhone5.

[This message has been edited by madcurl (edited 11-08-2012).]

[This message has been edited by troyboy (edited 11-10-2012).]

quote Originally posted by troyboy: LOOKING GOOD.

Most definitely! I was at a weekly car club meetup this morning in northern VA. Lots of Ferraris, Porsche, Lambos, Aston Martins, Audi R8s, Vettes out the yazoo, a Ford GT, a Telsa, a Nissan GTR, old school cars and trucks, and then there was my car. Everyone was impressed with my car...then I showed them pictures of both of your magnificient choptops. I had to convince some people that both yours and Curly's cars are still Fieros

[This message has been edited by Charlie64 (edited 11-10-2012).]

I got a set of rear springs from WCF several weeks ago and I'm having the shop next door install them. This will allow for additional inner barrel clearance for the rear tires if I decide to use the 345's in the rear. The shop found my wheel well liners, but didn't have time to install them. In other news, the C6 flipper underneath looks smooth as butter. Paying the extra bucks was well worth it. I sent 4.9 a pic.

It's time for badging.


Pete

[This message has been edited by madcurl (edited 11-10-2012).]