 
     |
| '88 Fiero Build "War Hammer" (Page 3/24) |
|
War Hammer
|
FEB 12, 04:46 PM
|
|
| quote | Originally posted by JamesCurtis:
Well I'm referring to how it feels on the low end, where it seems like it's running out of air, and how it performs when you floor it at 60mph. Just the basics 
oh, you mean pictures... Well just a few overviews that cover the wiring would be great. If they relocated the coil packs, maybe get a shot of that? As far as the exhaust goes, can you hear the s/c over the engine in the passenger compartment under WOT?
|
|
It feels way better on the low end from stock (phenomonally better). I haven't had it up to 60 yet. The motor seems to pull strong up to about 5k. The coils are on the firewall side of the motor (don't know where stock was). I cannot hear the s/c over the exhaust at any speed.
I will get pics up soon, probably on Thursday.
~Paul------------------
1988 Fiero
3800SC Series 1 w/5spd
Coilovers
18's w/Pirellis
Corvette Dash Mod
1985 GT
1986 Notchie
1987 Notchie
|
|
|
|
whadeduck
|
FEB 12, 04:50 PM
|
|
|
With your wiring difficulties, have you checked Painless yet? ------------------
Whade' "The Duck Formerly Known As Wade" Duck
'87 GT Auto
'88 Ferrario
'84 Indy
|
|
|
|
FastIndyFiero
|
FEB 12, 05:36 PM
|
|
|
|
|
mcaanda
|
FEB 12, 10:30 PM
|
|
| quote | Originally posted by FastIndyFiero:
Doug Chase at Chase Race makes fantastic cages/bars for the Fiero.
http://www.chaserace.com/
|
|
I can second that.
|
|
|
|
War Hammer
|
FEB 12, 11:04 PM
|
|
| quote | Originally posted by FastIndyFiero:
Doug Chase at Chase Race makes fantastic cages/bars for the Fiero.
http://www.chaserace.com/
|
|
Thanks for the info!
~Paul------------------
1988 Fiero
3800SC Series 1 w/5spd
Coilovers
18's w/Pirellis
Corvette Dash Mod
1985 GT
1986 Notchie
1987 Notchie
|
|
|
|
War Hammer
|
FEB 12, 11:08 PM
|
|
| quote | Originally posted by whadeduck:
With your wiring difficulties, have you checked Painless yet?
|
|
But I'm a Masochist. Seriously though, I am going to use a Corvette dash harness to mate the switches to the Fiero harness. I shouldn't be too difficult just time consuming.
Anyone have a dash wiring diagram they wouldn't mind posting for either or both?
Thanks,
~Paul
------------------
1988 Fiero
3800SC Series 1 w/5spd
Coilovers
18's w/Pirellis
Corvette Dash Mod
1985 GT
1986 Notchie
1987 Notchie
|
|
|
|
War Hammer
|
FEB 15, 10:56 AM
|
|
I have purchased my braided brake lines and calipers (2002 Camaro - not Corvette I know, but still should be good for up to 300-400HP and cost only $116 delivered for all 4).
Now all I have to do is buy rotors and have some brackets made. On the rotors, should I go with 13" Corvette or 13" Viper rears all around?
Anyone have any premade brackets for these (no West Coast or Fiero Addiction please - I've heard of the problems)? I still haven't heard from D1S.
Thanks you and keep watching!
~Paul
------------------
1988 Fiero
3800SC Series 1 w/5spd
Coilovers
18's w/Pirellis
Corvette Dash Mod
1985 GT
1986 Notchie
1987 Notchie[This message has been edited by War Hammer (edited 02-15-2008).]
|
|
|
|
War Hammer
|
FEB 15, 12:03 PM
|
|
Figured out how to post pics today!
I will post some of the calipers and lines also.
~Paul------------------
1988 Fiero
3800SC Series 1 w/5spd
Coilovers
18's w/Pirellis
Corvette Dash Mod
1985 GT
1986 Notchie
1987 Notchie
|
|
|
|
War Hammer
|
FEB 15, 12:34 PM
|
|
Here are the pictures of my calipers and brake lines. The brake lines are from Autobahn Performance Development and cost $77.00 delivered. You can reach them at 1.800.248.2861 or sales@autobahnpd.com.
~Paul
------------------
1988 Fiero
3800SC Series 1 w/5spd
Coilovers
18's w/Pirellis
Corvette Dash Mod
1985 GT
1986 Notchie
1987 Notchie
|
|
|
|
War Hammer
|
FEB 17, 11:49 AM
|
|
Hello All,
I purchased my new (to me) seats. I set of 1993 Corvette Sports seats off of ebay the other day. I'm I piece closer (lol).
Have a great day!
~Paul------------------
1988 Fiero
3800SC Series 1 w/5spd
Coilovers
18's w/Pirellis
Corvette Dash Mod
1985 GT
1986 Notchie
1987 Notchie
|
|
|
