Last Thursday's pics: Re-wet sanding again.
















A PT Cruiser headlight.

[This message has been edited by madcurl (edited 10-16-2012).]

I decided to take a look for myself.







They spray painted behind the vent.





Now the black screen won't stand out due to the backside being painted.





Before:



before:


After:


I like the black accents. They add a bit more detail to the hatchback.

[This message has been edited by madcurl (edited 10-16-2012).]

[This message has been edited by madcurl (edited 10-17-2012).]

quote Originally posted by Jim88GT: Please take the time to adjust the drivers side exhaust upward so it matches the passenger side - every pic I see I want to reach down and align it, but my arms won't reach from the East coast Jim

Before:


After:

[This message has been edited by madcurl (edited 10-17-2012).]

The new smoked out C6 side markers were a challenge, but in the end the shop prevailed. They had to shaved down some of the edges of the marker to fix. It took Mima several hours for he didn't want to break the light, but when Joe came by he popped them on in no time!

As you can see the light isn't flush, but i do like how the enlarged side vent gives the C6 Flipper more detail.







After carving out the opening they were able to fit the marker in.





We're moving pretty slow, but the car should be completed by Saturday-I hope.

[This message has been edited by madcurl (edited 10-18-2012).]

quote Originally posted by exoticse: are they going to install the audi lights before it leaves the shop ??

No. The electrical wiring isn't hooked up so I need to head back to WCF for that using a piggy-back bracket from either the C6 Fog light or C6 headlamp. The Audi lights will be housed between the two using one or both areas to bolt-up too. The only thing Trends did was to make sure the part fits up to the opening using the aluminum bracket that was made earlier.

[This message has been edited by madcurl (edited 10-18-2012).]