FieroGT stretch Concept (Page 29/240)
Amida SEP 02, 02:24 PM
Thanks for the compliments. I only rough sketch enough to visualize what I'm thinking...never took any classes.

Continued with a little more mock up this weekend. More measuring, eyeballing, & grinding. I split the Ferrari nose right down the middle; will need to reduce width later on to match the Fiero. A little more rough hacking on the sides as well. It's looking better. That's it for now.



x
Come to think of it, it is starting to look like my earlier sketch

[This message has been edited by Amida (edited 09-02-2007).]

Amida SEP 14, 12:02 AM
Continuing with the mockup. After the positioning & alignment was determined the mounting flange was added to the upper valance panel, and here the passenger side mounting flange is glassed in. The nose is temporarily clamped to the valance panel. Next, I'll transfer the measurements to the driver side & glass both sides together. I'll likely have to shave about 3/4" off the bottom to line up with the lower radiator mount.
x

[This message has been edited by Amida (edited 09-14-2007).]

Amida SEP 16, 03:20 AM
Thought I'd doodle a little before I hit the hay. Trying to figure out what to do with the Formula I have in the driveway. A more rounded look like the Solstice perhaps. The side mouldings could probably be left out.

[This message has been edited by Amida (edited 09-16-2007).]

RCR SEP 16, 06:52 AM
Go Rob, go!!

Bob
Amida SEP 16, 11:50 AM

quote
Originally posted by RCR:

Go Rob, go!!

Bob




Hey Bob, what you working on?
x
Amida SEP 16, 11:56 AM

x
Shortened the nose, moulded-in flairs, removed the side mouldings, & added a tail. Now the only Fiero ID left is the vertical window trim. This Body kit has a longer wheelbase, but is shorter overall from stock Formula.

[This message has been edited by Amida (edited 09-16-2007).]

Amida SEP 16, 05:46 PM

x
Reshaped the wheel wells. Can't see much of the original Formula underneath, but breaking from the traditional Fiero features will open up alot of possibilities.
americasfuture2k SEP 16, 10:28 PM
hey wow, these drawings are looking great! and that dash is very nice as well.
RCR SEP 17, 07:13 PM
Starting to look more and more like an F430. That's not a bad thing.

Me, I'm working on the 4.0 and trying to shoehorn it in. Thanx for asking...

Bob
Amida SEP 17, 10:56 PM
I must have Ferrari in my veins, the only reference I looked at was a 350z. I could study a Pinto & somehow end up with something like an Enzo.