 
     |
| newest project (Page 284/312) |
|
Alex4mula
|
DEC 15, 07:50 PM
|
|
| quote | Originally posted by Fiero2m8:
...
|
|
Very nice car! From that angle it looks to me a little like the late 70s Mazda RX7s.
|
|
|
Fiero2m8
|
DEC 18, 07:14 PM
|
|
Thanks guys for the positive comments.
Today I worked on reinstalling the sequential light system.
The contoller hides behind the subwoofer:
The cable is hidden behind the firewall and in wiring loom near the rear wheelwell:
 [This message has been edited by Fiero2m8 (edited 08-21-2012).]
|
|
|
|
Fiero2m8
|
DEC 18, 07:33 PM
|
|
Recently I was able to purchase more extra parts from Bubbajoe for the newest project.
One of the best items was a spare transaxle with starter:
I'm planning to install it and see how well it works compared with my rebuilt unit:
First I'm going to beautify the housing, so I prepared it for cleaning:
|
|
|
|
Ruffy
|
DEC 22, 05:12 AM
|
|
|
What transmission is that? Nice car!
|
|
|
|
bubbajoexxx
|
DEC 23, 02:45 PM
|
|
|
|
|
Fiero2m8
|
JAN 21, 01:06 PM
|
|
Not much to report as the flywheel project is on hold while I was in Vegas this week.
Two machinists haven't been able to do what I want and a third wants to build one from scratch for $1,500
The main issue seems to be that the input shaft bearing won't reach the shaft as the flywheel is 1/2" further away due due the larger pressure plate.
Before I left, I waterproofed the roof with new gasketed washer bolts that holds the roof panel to the spaceframe:
I never noticed before but the A-pillar molding clips are two on the drivers side and one one the passenger side as no hole has even been drilled:
Also put another coat of spray glue on my new headliner in preparation for installation:
|
|
|
|
bubbajoexxx
|
JAN 21, 05:59 PM
|
|
|
get the machinist who did the first one to make the new one he is here in TO canex machine shop
|
|
|
|
Stubby79
|
JAN 22, 10:10 AM
|
|
| quote | Originally posted by bubbajoexxx:
914 |
|
Hmm...thought those were only rated for about 140 ft/lbs...how's that holding up to the v8 torque? (if it hasn't be asked)
|
|
|
|
Fiero2m8
|
JAN 22, 01:09 PM
|
|
| quote | Originally posted by bubbajoexxx:
get the machinist who did the first one to make the new one he is here in TO canex machine shop |
|
Thanks Joe, I was thinking the same thing.
I'll pick up the flywheels and pressure plates this week and bring them to Toronto.
Ryan
|
|
|
|
bubbajoexxx
|
JAN 22, 01:44 PM
|
|
|
if i look i think i still have the longer impt shaft there are 2 types one long one short and i amposative i have both types
|
|
|
