 
     |
| newest project (Page 28/312) |
|
m0sh_man
|
FEB 28, 08:36 AM
|
|
| quote | | Originally posted by bubbajoexxx: exhaust almost done just 1 supertrrap left to finish here are some shots
|
|
Where does a person buy traps at? matthew
|
|
|
|
bubbajoexxx
|
FEB 28, 03:54 PM
|
|
|
|
|
bubbajoexxx
|
MAR 12, 07:04 PM
|
|
newest parts to be added Large 12 inch brakes from an 85 Corvette and its is the easest brake swap any one can do if you have a drill press
these pieces are all you need to do the swap 2 consentric rings for the rotors to keep them centered
and 2 1X4.5x2.5 piece of 7/8 inch mild steel for the coliper adapter
|
|
|
|
Master Tuner Akimoto
|
MAR 12, 07:32 PM
|
|
|
Bubba you let the cat out of the bag for all those having 12" brakes and never wanted to share it with any one else + for you .
|
|
|
|
bubbajoexxx
|
MAR 12, 07:37 PM
|
|
|
Master Tuner Akimoto the setup is so easy to do its shamefull will post all the dimentions hopefuly tomorrow then every one can make the change withoput paying 1700. to do it
|
|
|
|
Master Tuner Akimoto
|
MAR 12, 07:40 PM
|
|
|
|
|
Doug Chase
|
MAR 13, 03:31 PM
|
|
| quote | | Originally posted by bubbajoexxx: newest parts to be added Large 12 inch brakes from an 85 Corvette and its is the easest brake swap any one can do if you have a drill press |
|
Will these fit with the stock 15" wheels? I'm guessing no...
------------------
Doug Chase
Chase Race
Custom roll cage and exhaust fabrication
|
|
|
|
Jncomutt
|
MAR 13, 03:50 PM
|
|
|
I believe you need at least 16" wheels
|
|
|
|
Formula88
|
MAR 13, 03:53 PM
|
|
| quote | | Originally posted by Doug Chase:
Will these fit with the stock 15" wheels? I'm guessing no...
|
|
No way. I'm sure it requires 16" wheels minimum, and I wouldn't be surprised if it required 17".
|
|
|
|
bubbajoexxx
|
MAR 13, 07:00 PM
|
|
|
16 and up only 15's are a no go the 16 inch wheels clear by 3/4 of an inch on inside diam.
|
|
|
