Project Genisis Lo Budget 3800SC (Page 26/42)
hercimer01 MAY 22, 05:57 AM
I ordered 2, four cylinder dogbones from TFS. They were out of the sixes at the time so i made these and got them painted today. I also got some other little goodies from ZZP today Credit goes to Loyde, I got the idea from one of his builds.Keep in mind the (engine) right dogbone is offset to accomodate 2 equal length axles on both sides.

[This message has been edited by hercimer01 (edited 07-22-2012).]

hercimer01 MAY 24, 10:16 AM




[This message has been edited by hercimer01 (edited 05-27-2012).]

hercimer01 MAY 24, 12:08 PM
Aaaargh!!!
I broke my sail window trying to remove it.
I just ordered two tinted sail windows for it from Chris Cook. I have the door windows out so I can tint them.
hercimer01 MAY 27, 01:45 AM






hercimer01 MAY 27, 01:49 AM
The primer is PPG DP50LF and Omni MP282 high build over that. With a thinned sealer coat of DP50LF over the block sanded high build.

[This message has been edited by hercimer01 (edited 08-10-2012).]

hercimer01 MAY 28, 01:53 PM
Well, there it is ready for paint. I sanded the high build with 320 because that's all i had for sand paper. I mixed up some more DP50LF and cut it thin with reducer and sprayed a sealer coat over the sanded 320. The DP50 should hide the sander marks I hope.
hercimer01 MAY 28, 10:19 PM

[This message has been edited by hercimer01 (edited 06-03-2012).]

Stainless1911 MAY 28, 10:22 PM
black, nice.
hercimer01 MAY 29, 07:31 PM
3 coats of clear!!!







[This message has been edited by hercimer01 (edited 05-30-2012).]

hercimer01 MAY 30, 12:38 AM