 
     |
| Madcurl's Arch Rival !! (Page 259/315) |
|
qwikgta
|
AUG 27, 10:48 AM
|
|
| quote | Originally posted by madcurl:
Two side bolts and wheel liner screws to go,
. |
|
Madcurl,
I was going to move my canister too, and put it in the same place. But I was worried that because gas vapor came out of it, putting it near the heat of the pipes may be a bad thing. Any issues? Thoughts?
Rob
|
|
|
madcurl
|
AUG 27, 05:08 PM
|
|
Sorry, I haven't been updating this thread. Currently, I'm working on a different project while #020 is being painted. As Exoticse stated-I'm talking to HRE regarding my recent set of HRE 445 (hard to believe there was a set on Ebay) and another project using Whodeannie's Fiero hips. Anyway, I plan on going a different route on the next project, but to answer your question I haven't had any issues. I could have it mounted a few inches higher and put some installation material around it. There are others who have mounted it in a similar place, but I don't know how far it is located from the exhaust.
|
|
|
|
MountainHiBlue87GT
|
AUG 28, 04:53 PM
|
|
Curly:
Please take a few moments to locate the GT rear windows that you owe me and take them to WCF next time you are in Tehachapi.
Regards,
David------------------
1987 Fiero GT - 2006 3800 Series III Drive by Wire; Ported & Polished by TrippleEdge; 1.7 Yella Terra Full Roller Rockers; VS Cam; Tuning by Darth; WCF CAI & 1 5/8 Stainless Headers, 3" Exhaust, Power Steering & Much More; MSD Coils & Wires; Porsche (Brembo) Calipers on 13" Viper Rotors; 18X8 TSW Indy Wheels; Paint by Phoenix Auto in California City.
|
|
|
|
madcurl
|
AUG 28, 08:37 PM
|
|
| quote | Originally posted by MountainHiBlue87GT:
Curly:
Please take a few moments to locate the GT rear windows that you owe me and take them to WCF next time you are in Tehachapi.
Regards,
David
|
|
No problem. I'll recheck again, but I thought I already dropped the sail windows off. Did you call WCF? There should be two black plastic bags. If not, they're inside my garage. Sorry for the delay if that is the case.[This message has been edited by madcurl (edited 08-28-2011).]
|
|
|
|
madcurl
|
SEP 01, 12:46 AM
|
|
| quote | Originally posted by madcurl:
No problem. I'll recheck again, but I thought I already dropped the sail windows off. Did you call WCF? There should be two black plastic bags. If not, they're inside my garage. Sorry for the delay if that is the case.
|
|
I found the sail windows on top of #015. The same bag that V8Archie gave me when I left is shop several years ago. I'll drop them by WCF on Thursday.
Sorry, for my forgetfulness.
|
|
|
|
MountainHiBlue87GT
|
SEP 01, 05:07 PM
|
|
|
|
|
Syn
|
SEP 01, 07:55 PM
|
|
|
do you have an estimated time #20 will be out of paint? I think I'm getting an ulster from that anticipation!!
|
|
|
|
Archie
|
SEP 01, 08:05 PM
|
|
Hey, Curley, how about some progress pics of that paint job......
I'll show you mine if you'll show me yours. 
Archie
|
|
|
|
madcurl
|
SEP 01, 11:02 PM
|
|
| quote | Originally posted by Archie:
Hey, Curley, how about some progress pics of that paint job......
I'll show you mine if you'll show me yours.
Archie |
|
You go first, hehe.
Hey Dean. I dropped off the sail window at WCF this evening.
I was going to buff them out, but chances are I'd just might break one of them, so I decided to leave well enough alone.
|
|
|
|
MountainHiBlue87GT
|
SEP 02, 08:34 PM
|
|
|
They look to be in better shape than my current windows! The NOS windows that I bought from you are under my bed. ------------------
1987 Fiero GT - 2006 3800 Series III Drive by Wire; Ported & Polished by TrippleEdge; 1.7 Yella Terra Full Roller Rockers; VS Cam; Tuning by Darth; WCF CAI & 1 5/8 Stainless Headers, 3" Exhaust, Power Steering & Much More; MSD Coils & Wires; Porsche (Brembo) Calipers on 13" Viper Rotors; 18X8 TSW Indy Wheels; Paint by Phoenix Auto in California City.
|
|
|
|