We Build a Perfect Union (Page 249/309)
ClayTonto JAN 15, 12:16 AM
YEAH!!! This seriously made my day.

OH YEAH!!! Page 63 ownage makes it sweeter.

[This message has been edited by ClayTonto (edited 01-15-2010).]

troyboy JAN 15, 12:50 AM
My wife just gave me the evil eye and said "press that play button one more time and Archie will have a roomate" ........Great video !!!
exoticse JAN 15, 01:24 AM

quote
Originally posted by troyboy:

My wife just gave me the evil eye and said "press that play button one more time and Archie will have a roomate" ........Great video !!!



lmao !!
Jake_Dragon JAN 15, 06:54 PM
Archie what is the red line on his car?
Archie JAN 15, 09:59 PM

quote
Originally posted by Jake_Dragon:

Archie what is the red line on his car?



Displacement = 7.0 L. / 427 CID
Bore x Stroke =
Compression Ratio = 11.1:1
Horsepower = 505 HP @ 6,200 RPM
Torque = 475 #-Ft. @ 4,800 RPM
RedLine = 7,000 RPM
Fuel Cut OFF = 7,100 RPM
Dry Sump


Archie

BTW, someone asked what size header tubes are in the headers. That would be 1-7/8".

A

[This message has been edited by Archie (edited 01-16-2010).]

LT188GT JAN 16, 08:47 AM
Off topic a little but Archie do you remember these?
Ever wonder how you worked with so little room compared to now?
My LT188GT is on top of the lift.





And one for Curly



My car next to Curlys soon to be chop top.

[This message has been edited by LT188GT (edited 01-16-2010).]

troyboy JAN 16, 12:20 PM

quote
Originally posted by Archie:



Can't upload video to UTube from my shop PC because we only have Dial-up in this industrial park.

I'll do it tonight from home.

Archie




Archie what grade of gas was used for this run? Looks like the 29th, and 30th for the pick up dates.
Jake_Dragon JAN 16, 12:56 PM

quote
Originally posted by Archie:


Displacement = 7.0 L. / 427 CID
Bore x Stroke =
Compression Ratio = 11.1:1
Horsepower = 505 HP @ 6,200 RPM
Torque = 475 #-Ft. @ 4,800 RPM
RedLine = 7,000 RPM
Fuel Cut OFF = 7,100 RPM
Dry Sump


Archie

BTW, someone asked what size header tubes are in the headers. That would be 1-7/8".

A




It just sounded like it had a little more in it but the guy let off.
Archie JAN 16, 05:50 PM

quote
Originally posted by troyboy:


Archie what grade of gas was used for this run? Looks like the 29th, and 30th for the pick up dates.



Premium pump gas.

Dates look good, we should talk this next week.

Archie
Archie JAN 16, 06:17 PM

quote
Originally posted by Jake_Dragon:


It just sounded like it had a little more in it but the guy let off.





You'll notice that between these 2 runs, we added a little timing above 5000rpm.

Notice that in the run called 003 the HP straightened out & held after hitting it's peak at about 6100 rpm.

At that point the datalogging was showing the injectors at 85% duty cycle. To get much more it'll need bigger injectors.

In the chart below notice how the same 2 runs gain a couple of HP by setting the smoothing at 0. Smoothing is at 4 in the 1st pic above.



Archie