"ABT" Steel Lady (56k warning) (Page 24/28)
Fiero1Fan OCT 02, 12:40 PM
Time to post a bit of an update.

The final stages of the stereo amps and woofers install.




The woofer boxes will be covered in suede leather.

[This message has been edited by Fiero1Fan (edited 10-02-2006).]

Fiero1Fan OCT 02, 02:31 PM
Here is another little project that I have running right now.
This is a prototype and more R&D is needed but when they are finished then I'll have them for sale to anyone that is interested.
Fiero1Fan OCT 03, 04:17 PM
Here are a couple of pix of what I am doing with the brackets.

The Rectangular: (Thanks to Electrathon)


The Twin Rounds: (Thanks to Yellowstone)
This images is larger than 100K. Click to view.
This images is larger than 100K. Click to view.
fierov8 OCT 03, 06:02 PM
Fiero1Fan.........

Is your quad headlight kit being set up to use the Hella 90mm headlights? If so -- I'm VERY interested in being in line for when you start making them available. I already have the lights, just need the brackets.

PM me pics/details.......thx in advance,

-jeff d
Fort Worth, TX
Fiero1Fan OCT 04, 03:49 PM
The progress for today.
Passenger side finished.


The mounting of the 2nd amp.


Now a problem.


I had thought that as low as I was placing the subs the fuel fill pipe wouild not be in the way. I thought WRONG!!
Anyone have an idea what I can do to move the pipe up about 2 inches?
Fiero1Fan OCT 07, 09:41 AM
Well today I droped the tank and swaped in the new fuel pump. It works now when I turn the key!!!

As most of you know and can see in the pix I had removed and painted my coolant pipes not too long ago (yellow of course). Welllllll........as I was looking at that FUGLY grey gas tank I got an idea!! I have decided to clean up and paint the tank YELLOW!!

I have also fonud the gas / acid resistant rubber hoses I need to relocate the fuel fill lines. Thinks are coming along nicely.

[This message has been edited by Fiero1Fan (edited 10-07-2006).]

Fiero1Fan OCT 10, 03:06 PM
I covered my liner today with the cloth I had already bought for it. I'll do it in leather some other time.

I want to add a small reminder (warning) here. If you purchase and use one of the after market fiberglass liners, remember to cut the 3rd brake light, visor and clothes hanger holes BEFORE you glue on the cloth or leather!! DO NOT ask me why I mention this here!! ops: :shock: They're marked on the front side but not on the back side. I had to use the old liner pieces to mark the places that needed to be drilled and cut. What a pita!! :P

Visor holes:


3rd Brake light and hanger holes:



It should look something like this when you are finished. Yours will differ slightly........ because my son won't be holding it up!! :lol: :lol:


Here is a mock-up of what mine will look like.
Sharkman OCT 10, 04:45 PM
Looking good.

------------------
Regards SHARKMAN
86 GT, 3.4 Camaro engine,
choptop # 1 in Europe/Sweden

whadeduck OCT 10, 05:03 PM
Looks like you'll be finished in no time. After that, you'll probably have some time on your hands. How 'bout hoppin' over the puddle and give me a hand with mine? lol

------------------
Whade' "The Duck Formerly Known As Wade" Duck
'87 GT Auto
'88 Ferrario
'84 Indy (8/26/06)

Fiero1Fan OCT 11, 02:28 PM
Here it is more or less finished. The drivers side sub is only sitting in there for the moment until I get the rubber hose for the fuel fill line.

From left:


From right:


From the center:


I sure like the balanced look!!