 
     |
| newest project (Page 24/312) |
|
Nashco
|
JAN 25, 09:48 PM
|
|
Even if there were cheaper routes, I still think that four carb setup would be worth it. It looks SWEET!  I'm not much of a fan of carburetion, but no self-respecting gearhead can't show appreciation for that much complexity.  Bryce
88 GT
|
|
|
|
jstricker
|
JAN 26, 12:41 AM
|
|
|
Joe, I hope you didn't take my comments wrong. I certainly understand why you did it the way you are. First off, you have the capability and the tools to do the machine work, and there's a busload of it in the quality work you've done. Second, you're not daunted by having to fabricate things. Believe me, I know where you're coming from. I was told that I couldn't use the late model Northstar Throttle Body on the early, magnesium intake manifold, but I have it done and ready to go. My point was that for OTHER, more human (as opposed to superhuman  ) hobbiests, it wouldn't figure out to be very cost effective, I don't think. Whatever *I* think about it's cost effectiveness, you're doing some beautiful work and it's going to be a unique transplant (not to mention the rest of the car). I'm enjoying the thread immensely. John Stricker
| quote | | Originally posted by bubbajoexxx: jstricker as you can see here is the front drive dist cost for every thing $400 can.
as for the fuel system i made my own manifold
and set it up with DELLORTOS
thats one carb per cylinder as dellortos are 2carbs with a common float bowl
as each carb has its own settings for each barrel cost $400.can CHFAB these parts would cost me (manifold 650 US thats 990 can. ignition HPV! 600 thats 940.can.
by the time I get them so I have saved plenty
and to use Design ! Nstar setup thats 3000+ no thanks |
|
[This message has been edited by jstricker (edited 01-26-2004).]
|
|
|
|
virii01
|
JAN 30, 05:38 PM
|
|
...looks around the room....
....wait for it..
....wait for it...
BUMP
|
|
|
bubbajoexxx
|
FEB 05, 09:06 PM
|
|
|
|
|
meximan
|
FEB 05, 09:34 PM
|
|
|
I would try it without the quarter window.
|
|
|
|
Rickady88GT
|
FEB 05, 09:50 PM
|
|
|
|
|
bubbajoexxx
|
FEB 16, 06:36 PM
|
|
just finished the shifter fore the porsche trans axle will post pics tomorrow night .
Have more to do tomorrow will have all the pivcs taken then so you will have a recient update
|
|
|
|
fierodustin_86
|
FEB 16, 10:19 PM
|
|
Just a little curious and I dont know if anyone else has asked or if I'm just ignorant, but does engine turn the right way for the trans? Will it all work? I actually have NO idea and would just like to know for furture reference.
dd------------------
 86 Fiero SE
email: fierodustin@yahoo.com
PROJECT: 86 GT soon with a 3800SC
|
|
|
|
bubbajoexxx
|
FEB 16, 10:22 PM
|
|
|
the trans I am using is mid engine and has the diff allready flipped , rear engine porsche 911 need to have the diff flipped over
|
|
|
|
fierodustin_86
|
FEB 16, 10:40 PM
|
|
|
|
