F40 replica pics (Page 21/55)
ferrobi OCT 22, 06:14 PM

quote
Originally posted by HTXtremes:

What are you using for driving lights on your car?




Which lights are you talking about - Pop up driving lights or fog lights or parking lights?
ferrobi OCT 22, 06:17 PM
Rob sent me an update - "Over the weekend I was able to smooth out the top surface and start shaping the pocket for the instrument panel. The pocket also doubles as the center steering column mount where the old Fiero cluster used to attach. During the trimming process the fiberglass will be cut away to allow access to wiring & windshield mounts. I wish that I could use a DA for sanding but my 30 gallon compressor doesn't have the air capacity to run it so I'm using alot of elbow grease"

------------------

HTXtremes OCT 22, 09:52 PM
I was talking about the fog lights and turn signals. They look really good!

------------------
'88 Coupe (extensive mods underway)
http://www.fiero.nl/forum/Forum2/HTML/086359.html

ferrobi OCT 22, 11:09 PM

quote
Originally posted by HTXtremes:

I was talking about the fog lights and turn signals. They look really good!




Turn signals are modified (Cut) fiero turn signals and I don't remember what fog lights are but I will check. They are modified from the original installation from Archie - I took off clear glass lens covers and mounted them on the inside of the driving light buckets. The light and housing is then on the outside of the rear of bucket and is adjustable for direction.
ferrobi OCT 29, 05:32 PM
More dash update pics -
Doc John OCT 29, 06:22 PM
Is Rob going to upholster the dash for you?
Mr.PBody OCT 29, 06:26 PM
Alright I am going to ask the dumb question... Are you re-doing the already done V6 F40, or is this interior for the primer V8 F40? I got mixed up/didn't read all 6 pages.
ferrobi OCT 29, 06:54 PM

quote
Originally posted by Doc John:

Is Rob going to upholster the dash for you?



Yes I am going to have him upholster it for me also - We still haven't decided if it will be the grayish floc stuff like the original or something smoother like leather or vinyl. I'm leaning towards leather or vinyl in black - much easier to clean. It is going to be mated to his super nice 355 center console and Riceburner's replica HVAC control panel.
ferrobi OCT 29, 07:21 PM

quote
Originally posted by Mr.PBody:

Alright I am going to ask the dumb question... Are you re-doing the already done V6 F40, or is this interior for the primer V8 F40? I got mixed up/didn't read all 6 pages.



Re-doing the already done V6 F40 - the other F40 in primer is not mine.
ferrobi DEC 01, 01:38 PM
Here's a few shots of the instrument pod model before tooling.