 
     |
| CHOP TOP # 15 !!!!!!!!!! (Page 19/78) |
|
madcurl
|
FEB 21, 03:13 PM
|
|
|
|
|
madcurl
|
FEB 21, 03:22 PM
|
|
| quote | | Originally posted by Jncomutt: You going to take that lower GT aero rocker panel of the bottom of the door? |
|
I don't know yet? I have three Ausie rocker door panels. I originally had planned on using Ausie on the bottom too. In any case, the door panel will no doubt be the last item that I'll tackle. It will be changed for the Ausie or molded into the door skin. Right now, I'm focused on the rear bumper and front flaring for now. It's getting really "old" driving around with a primered car. I don't like long drawn-out projects. I like to finish it before I get bored and then move on to other "pipe dream" projects.
The gas cap opening is cut and will be laid at a angle similar to the Redux's. This involves more time so I'll jump on it 3/2/05. I have more pics. Exoticse may post them once he has time. Enjoy the show. Thanks for your thoughts. [This message has been edited by madcurl (edited 02-21-2005).]
|
|
|
|
madcurl
|
FEB 21, 03:30 PM
|
|
| quote | | Originally posted by Sharkman: Soo the VDC are ready too buy and bolt on from XS customs? (First on page 4 and 5!) |
|
Yeah, the (bolt-on) VDC kit are ready to buy. Jerry is going to install them while I'm in FL.
|
|
|
|
Nebiros88
|
FEB 21, 04:23 PM
|
|
|
So I'm assuming the XS VDC kit is around $1500? and it is now a bolt-on do it yourself setup without any extra modifications? Contact info for them? I might have missed it somewhere in this thread, if so im sorry.
|
|
|
|
madcurl
|
FEB 21, 05:17 PM
|
|
| quote | | Originally posted by Nebiros88: So I'm assuming the XS VDC kit is around $1500? and it is now a bolt-on do it yourself setup without any extra modifications? Contact info for them? I might have missed it somewhere in this thread, if so im sorry. |
|
look here for more info> http://www.fiero.nl/forum/Forum1/HTML/048655.html
|
|
|
|
exoticse
|
FEB 21, 09:58 PM
|
|
|
|
|
exoticse
|
FEB 26, 11:58 PM
|
|
|
New for the interior Mustang vents. 
Inside of vents will be painted black Momo steering wheel installed 
[This message has been edited by exoticse (edited 03-03-2005).]
|
|
|
|
Jncomutt
|
FEB 27, 12:03 AM
|
|
|
Hey madcurl, how about you get rid of the filler there?? Use a 'full' front fender and copy the design as you did the otherside. Relocate the filler nozzle behind the driverside tailight. You can put a hinge mechanism by the trunk lock. You can then extend the cable to a factory style latch that would connect to the outer edge of the tail light assembly. When you need gas, pull the lever, the taillight would pop out about 4" on a center pivot, Fill the tank, click the tail light back into position, off ya go!! ------------------
--1986 SE V6, Wild Custom Notchback --For Sale Click Me!
--1984 SE Modified Notchback
|
|
|
|
madcurl
|
FEB 27, 12:28 PM
|
|
| quote | | Originally posted by Jncomutt: Hey madcurl, how about you get rid of the filler there?? Use a 'full' front fender and copy the design as you did the otherside. Relocate the filler nozzle behind the driverside tailight. You can put a hinge mechanism by the trunk lock. You can then extend the cable to a factory style latch that would connect to the outer edge of the tail light assembly. When you need gas, pull the lever, the taillight would pop out about 4" on a center pivot, Fill the tank, click the tail light back into position, off ya go!! |
|
Hmmmm.....I seen that on a import. Good idea, thanks. I was thinking of moving the gas cap north a little. I have a few ideas left. I did however, checked on the Audi TT gas cap........WOW! Too rich for my blood.
|
|
|
|
exoticse
|
FEB 28, 12:18 AM
|
|
| quote | | Originally posted by madcurl:
Hmmmm.....I seen that on a import. Good idea, thanks. I was thinking of moving the gas cap north a little. I have a few ideas left. I did however, checked on the Audi TT gas cap........WOW! Too rich for my blood.
|
|
Just curious, how much was it ??
|
|
|
