 
     |
| ecotec swap (Page 18/98) |
|
Fosgatecavy98
|
MAR 19, 04:09 PM
|
|
| quote | Originally posted by sYkboy:
I feel the ugly monsters of envy and jealousy stirring!
|
|
Pshh maybe but in my books WTFB is right up there next to God and Chuck Norris! Hes my hero!
|
|
|
|
wftb
|
MAR 19, 09:23 PM
|
|
|
chuck norris - thats way over the top !
|
|
|
|
wftb
|
MAR 27, 11:48 PM
|
|
i put the car back together today and took it for a ride .the blow off valve has quite a distinct sound to it.but i did not get to open it up because i got a mile down the road and the boost pipe blew off the airbox .it was pretty dark out by then so i put it back in the garage.i tightened the clamp on the pipe and it should hold now.i had to build a new centre consule to cover my shifter mods and finishing that took most of today .so here are some more pics:
|
|
|
|
wftb
|
MAR 27, 11:49 PM
|
|
|
|
|
wftb
|
MAR 27, 11:51 PM
|
|
|
|
|
wftb
|
MAR 29, 07:59 AM
|
|
|
got the pipe back on and have driven the car for the last 2 days.i cant floor it because the boost causes knocking .i was expecting this but i wanted to drive the car before tuning so i would know what i needed to buy.you can feel the extra power in top gear.so i have a new fuel pressure reg. coming and a methanol injection kit coming.that will be a start on the tuning process.
|
|
|
|
FieroCustom
|
MAR 29, 10:38 AM
|
|
Yay! You're BACK! YAY! I just checked and YAY! WFTB, you should have a pm waiting for you with a question about the master/slave issue. I finally recieved the Cobalt master cylinder and flywheel!(Thanks Monster Parts!) And I saw that you mentioned my swap on page 4, cool. Yes I'm away often even when my ship is inport. My department (reactor department) is on 2 section duty meaning that I get 16 hours off out of every 48 with a 2hr commute both ways from Everett WA to Bremerton WA. I'm still looking for parts that I need as I make slow progress on my swap. I had to go to a dealership to get my electronic accelerator pedal to control my throttle body since my engine has the fly-by-wire controls. And I've still got the A/C lines issue to resolve.
John[This message has been edited by FieroCustom (edited 03-29-2007).]
|
|
|
|
wftb
|
MAR 29, 11:04 PM
|
|
more pics
|
|
|
|
wftb
|
MAR 29, 11:06 PM
|
|
|
|
|
Fosgatecavy98
|
MAR 29, 11:47 PM
|
|
| quote | Originally posted by FieroCustom:
Yay! You're BACK! YAY! I just checked and YAY! WFTB, you should have a pm waiting for you with a question about the master/slave issue. I finally recieved the Cobalt master cylinder and flywheel!(Thanks Monster Parts!) And I saw that you mentioned my swap on page 4, cool. Yes I'm away often even when my ship is inport. My department (reactor department) is on 2 section duty meaning that I get 16 hours off out of every 48 with a 2hr commute both ways from Everett WA to Bremerton WA. I'm still looking for parts that I need as I make slow progress on my swap. I had to go to a dealership to get my electronic accelerator pedal to control my throttle body since my engine has the fly-by-wire controls. And I've still got the A/C lines issue to resolve.
John
|
|
Welcome to the ranks hehe, do you have a build thread yet? Im just in need of my flywheel before I can start mine up 
|
|
|
