Audi A8 My Fiero (Page 171/220) engine man AUG 26, 08:47 PM Ok I will turn the idle down to where it is on the raged edge of running so you feel better Lol Patrick AUG 26, 10:07 PM quote Originally posted by engine man: Ok I will turn the idle down to where it is on the raged edge of running so you feel better Lol Yes, please! It's that "ragged edge" sound that I miss. Out of curiosity, what is the approximate idle speed in that video? (...because it does seem quite smooth.) engine man AUG 27, 08:58 AM it is at 1100 so it needs to come down a bit motoracer838 AUG 30, 05:44 PM I thought the idle was on the high side, we need to hear more than the idle... Joe engine man AUG 30, 08:05 PM once i get it sorted out i will do a good over the road video l should be pulling the engine out this next week so i can get the new oil seals in and get my belts situated i think i want to move the computer as i feel it is in a bad place for heat engine man SEP 01, 07:01 PM I should be pulling the engine out Monday so i can hopefully get it back in by the end of the week engine man SEP 02, 06:05 PM ok tomorrow the engine comes back out of the Fiero i hope for the last time to replace the cam seals and the crank seal plus do the dual belts for the supercharger and move the intake air temp sensor think it will be back in by next weekend it depends on how it goes as far as the belt system as i need to fabricate that engine man SEP 03, 01:43 PM Ok the engine is all out it took 3 hours as i struggled with the throttle body getting it off the supercharger as it had a few socket cap screws that striped the heads out so that took a extra half hour engine man SEP 05, 05:57 PM It seems the pulley hub on the supercharger was slipping on the shaft as i noticed the pulley wobbling so i disassembled all of it and it appears there is galling on the shaft and the hub sourmash SEP 05, 09:35 PM Is it keyed, press fit or other?