2008 Custom2M4 Build - We Continue! (Page 17/18)
Custom2M4 MAY 28, 06:20 PM
Heres a better update. I've been working on my house lots as of late due to the baby on route in 3 weeks. So I haven't had any real time to update this. But for anyone still following, and curious about my 5x114.3 swap.. Heres some finishing updates.

My homemade stud install jig.




My custom rear hubs. Costed close to 600 dollars by the time I was said and done for this set. With a brand new machined hub flange welded to the factory splined hub, balanced and cleaned up. Then rebuilt / packed with the factory bearings.




And the completed fronts. Costed me about 100 dollars for the pair. With a new flange made, welded, drilled, cleaned up and studded (extended studs).




I hope to have more next weekend to post up. Enjoy.
exoticse JUL 27, 09:56 PM


Bump for an update, but i am guessing the baby has probably derailed your progress for the time being ?

I know cause my wife and i just had a baby in April and your free time is virtually zero for the first few months.
Custom2M4 SEP 14, 08:32 PM
Surprisingly not tony. I've been working hard to get my house ready for the winter (roof and such), as well as putting alot of time into my firebird as of late. I guess I owe you guys an update on the fiero . I'll do so soon.

Cheers,
Chase.
Custom2M4 JAN 13, 05:52 PM
Update!

Heres the hot side, I think I'm still going to change out the wastegate pipes for larger, but they are okay for now. I also have a couple more support hangers to build in order to hold all this together.



Heres how I did the cold side splitter;




Cleaned up the spare N*



Just finishing up on the motor for my 71' Firebird, 400ci pontiac 448hp, 460ft.lbs



I also just did a mass fierostore / rodney dickman order so hopefully by next weekend everything arrives!

[This message has been edited by Custom2M4 (edited 01-13-2013).]

Custom2M4 JAN 22, 10:27 AM


Packages Arrived!

Another awesome transaction with rodney dickman and the fierostore.com.

All new brake lines
SS brake hoses
All new ebrake cables, and hardware / adjusters
Aluminum Slave Cyl
New slave clutch line
One man bleeder kit
and a 1" upgrade front sway bar.

Sweeet
Custom2M4 MAR 29, 07:14 PM
Doing some sanding / blocking lately.. Lots of blocking..






Here is the finished picture of all the turbo plumbing.. Including the air filters.


I just made an order for a blue 3" 90' for the intake, as well as the flanges and parts for the turbo oil lines. She should be all buttoned up mechanically really soon.

I just found out that the drop spindles in the front are shot ( stripped threads ) , so I'm on the hunt for some stock replacements. If anyone is interested in buying the drop spindles off me for cheap let me know.
Custom2M4 NOV 10, 01:49 PM
Wow, been a while since I've updated. I just recently moved, and didn't have the internet for the last couple months. So here's the newest, pictures and all.

-I painted the roof black,
-painted almost all of the lowers blue, the hood,
-black valance in the front,
-worked on the interior a little more.
-Not much on the engine, other than totally finish the cold side,
-Re-installed the stock front spindles, painted and refinished the front end,
-Installed my 11.25 brakes in the front (still have to install the brake lines),
- Installed new ball joints and tie rods where applicable.
-Removed and got ready for new upgraded sway bar and links. (didn't want overspray)
-The wife is pregnant, having another baby, still not selling the cars.
-And then ran out of paint and didn't have enough to finish the rear bumper valance. Oops.

Pictures to follow in a few minutes, my computer is just slow uploading them.
Custom2M4 NOV 10, 02:04 PM










Let me know what you think of the black two tone. I still want to do a black insert in the widebody on the doors when that gets completed.

[This message has been edited by Custom2M4 (edited 11-10-2013).]

Custom2M4 NOV 24, 05:46 PM





Self explanatory. Another color difference shot on the old paint vs new and how I cut the black into the blue.
Custom2M4 MAY 09, 02:25 PM
Just picked up a brand new F23 to toss at the car! Cradles dropped again, getting ready for the new drivetrain. Hopefully it lasts behind this setup for a few weeks anyways! Pictures to come when it gets here.