"concept GTR" dash build-up...Fie Ro style! ;) (Page 17/56)
Fie Ro FEB 08, 06:15 PM
...some feedback from combining some ideas in photoshop.... this is still fun! :

I own page 3/4/5 ! lol...must be posting too much

[This message has been edited by Fie Ro (edited 02-08-2005).]

David DeVoe FEB 09, 07:30 PM
buump
Fie Ro FEB 10, 01:49 PM
hopefully tomorrow I'll get the cluster in the mail.....!
did some more photoshopping:

..got a few other ideas too...
Fie Ro FEB 10, 07:08 PM
some more sketching on the doorskin
Fie Ro FEB 11, 03:26 PM
Got some mail and did a comparison mockup:

That looks quite cool on the butchered dash of my daily driver

the size is quite close to the stock cluster, about an inch can be easily chopped from the TT front if needed

Heres the challenge: wiring from the fiero cluster connector to the green and blue connectors on this one...

I got some instructions how to wire it to a VW Golf3, it identifies most of the pins (in german) but I will need more info! I hope you guys can help me out with this...

- I need a pinout diagram of the fiero cluster connector. My haynes doesnt help
- a pinout of the numbering on the audi TT cluster connectors.. (without CAN bus)

Fie Ro FEB 11, 03:58 PM
one more picture:
David DeVoe FEB 11, 05:24 PM
Your second photoshop rendering is absolutely killer...that perforated material looks very cool and would work well with satin finish aluminum and carbon fiber. Keep it coming!
4.9 PFI FIERO FEB 11, 05:35 PM
Just a thought.
Make a conversion wiring diagram for those whom may want to use that cluster it will make life so easy for the diy...
PaulJK FEB 12, 02:28 AM
Hope this helps:

I don't think these are the absolute reerence, but it's a start

[This message has been edited by PaulJK (edited 02-12-2005).]

Fie Ro FEB 12, 10:39 AM
Thanks, that already helps a bit.

quote
Originally posted by 4.9 PFI FIERO:
Just a thought.
Make a conversion wiring diagram for those whom may want to use that cluster it will make life so easy for the diy...

I sure will do that if I can get it to work! I already share every little thing I am doing....
I took my spare fierocluster to look how to do the new setup. The housing of the fierocluster is actually the connector itself.So if I can mount and wire the TT cluster into the old case it would be a drop-in replacement for a stock cluster....this looks like the best solution for now...


The odometer has it own connector:

last one of the "digital" version