Don Kraus's 427 LSX Update (Page 16/28)
Dizzixx JAN 20, 11:27 PM
and I thought I took forever to complete a project...
Will JAN 21, 08:59 AM

quote
Originally posted by Dizzixx:

and I thought I took forever to complete a project...



Obviously you haven't read my build thread
SuperchargedV6 JAN 21, 01:05 PM
I cant wait to see the Beast in its new shoes. Rick B
Mr Ferrari JAN 24, 12:05 AM
Any new updates on the beast Don?

Too Far is in Minnesota now.. I have had her home for a few weeks, but its been so stinking cold out I have not been able to look much of it over yet..
Mr Ferrari MAR 19, 03:19 PM

quote
Originally posted by madcurl:

A bit too quiet here.



Time to wake her up from hibernation Don..

Dennis LaGrua MAR 20, 09:27 PM
Thats a tremendous amount of horsepower to put in a Fiero. Cradle reinforcement would probably be advantageous. If you are shooting for the 10 second bracket, NHRA requires a trans shield, a roll bar (similar to yours), a easty accessible rear cutoff switch, and you need to wear special race apparel etc etc. Good luck. Thats going to be one fast ride.

------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, 3.4" Pulley, N* TB, LS1 MAF, Flotech Exhaust Autolite 104's Custom CAI 4T65eHD w. custom axles, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "

Erik MAR 21, 03:22 AM

quote
Originally posted by Will:


Obviously you haven't read my build thread




git er done ... want to see a Ferrari like rev band in a Fiero for a change
Don Kraus MAR 22, 04:41 PM
It's about time you heard from me,I admit I've been doing a little traveling the last two months and haven't worked on the car much.But during that time I had the exhaust ceramic coated and finally got the right offset on my rear wheels.The wilwood brakes are filled with fluid and bled,antifreeze is in as is trans fluid,so the car has taken liquids.I just have to finish the wiring,and as you can see its a bigger job than I thought mating a stand alone system with the body wire harness and the transmisson computer.I'm in the process of getting rid of all the wires I don't need and that means taking the dash out that I hadn't planed on.
So here you have pictures of the wiring in the car,rear exhaust with mufflers,Wilwood brakes and my dash gauges.
I'm hoping to have it running in the next couple of weeks.

Don



------------------
Too Far
60' - 1.491 sec
1/4 mi - 11.323 sec
mph - 116.40

Erik MAR 22, 11:46 PM
that exhaust is elegant
hye_4_life MAR 23, 12:47 AM

quote
Originally posted by Don Kraus:

Hey guys,just got my car back from paint,here's a little tidbit.Want more???
Don







Are these tires directional? They appear to be going the wrong direction.