Rhythm - Rolling Art (Page 13/14)
Bloozberry JUL 27, 10:03 AM
XThirtySeven AUG 07, 11:33 PM
I totally see a supervillain driving this thing. I love it. Top 5 favorite Fieros
iNVisionPROTOTYPES SEP 13, 11:40 PM
Hi everyone!

Here's a little update on R2.

With the integrated cage installed we can work on fitting the roof for the final time. With edges rolled at the door tops, low spots are slowly worked out with a dollie and spoon. This is as close as we can get without the windscreen in place. Next step, mock up the windscreen and gap the perimeter.


Windscreen dropped into place. Checking to ensure that we haven’t lost the ¼” perimeter gap during the transition from the wire frame buck stage to the current stage of panel assembly.


Primary and secondary door seals installed. The secondary lower seal will be part of the door. It’s crucial for these seals to sit correctly in all the right areas, otherwise you’ll get air noise and water entering the cab. Also, this is what makes or breaks that 'factory' look.


Thanks for checking out the build.

------------------
Nick M.

A journey in design and fabrication begins with a vision, a single pen stroke ... and in some cases the blow of a hammer.

Some projects: http://www.facebook.com/iNVisionPrototypes

doublec4 SEP 14, 12:09 PM
Really liking the shape of the R2. I'd love to see it in person sometime, you have an amazing set of fabrication/artistic skills.
iNVisionPROTOTYPES SEP 14, 11:04 PM
Thanks doublec4! Much appreciated.

Sure, you can drop by... just shoot me a PM or email me - nick@invisionprototypes.com ahead of time.

------------------
Nick M.

A journey in design and fabrication begins with a vision, a single pen stroke ... and in some cases the blow of a hammer.

Some projects: http://www.facebook.com/iNVisionPrototypes

iNVisionPROTOTYPES NOV 28, 12:26 PM
She's a roller!

Not exactly sitting on 20's yet, but to free up the frame table R2’s body was transferred onto it’s own body cradle.

------------------
Nick M.

A journey in design and fabrication begins with a vision, a single pen stroke ... and in some cases the blow of a hammer.

Some projects: http://www.facebook.com/iNVisionPrototypes

Bloozberry NOV 28, 02:57 PM
That's looking wicked Nick. Thanks for posting your progress... we need more though!
iNVisionPROTOTYPES MAR 06, 11:30 AM
Hi everyone!

Here's a little update. Decision was made for an interior redesign.

Sheet metal buck components being created for the new molds. Soon as a few other things I have underway are under control I'll get into making the molds and final parts.


Thanks for looking!

------------------
Nick M.

A journey in design and fabrication begins with a vision, a single pen stroke ... and in some cases the blow of a hammer.

Some projects: http://www.facebook.com/iNVisionPrototypes

BrittB MAR 08, 10:41 PM
Very cool, loving it!
Stubby79 MAR 09, 02:17 AM
Where can I order one?