 
     |
| Project Genisis Lo Budget 3800SC (Page 11/42) |
|
hercimer01
|
JUL 15, 03:44 AM
|
|
|
The Bosch 69225 fuel pump is only rated up to 34 PSI.Edit; I went with the Airtex equivalent of the EP376. [This message has been edited by hercimer01 (edited 02-20-2012).]
|
|
|
Ohiofierokid86
|
JUL 15, 06:08 AM
|
|
|
|
|
hercimer01
|
JUL 16, 03:41 AM
|
|
I need ;
S-10 brake booster upgrade. Still need as of 7/28/12
Outer dew wipes. Done
Air intake plumbing. Done
An exhaust system. On order. Done
86 Grand Am brake upgrade. Have new Grand Am calipers and rotors. Done (new brake lines too.)
Two rear toe links with tie rod ends. Re-threading the tie rod ends. I know now to smack the knuckle with a hammer, not the threads. Repaired threads and got new castle nuts.
A tranny cooler. Swapped in an auto radiator.
Trans cooler lines. Installed new lines going to the back.
An ECM tune. Received one of nosrac's. And did a CASE learn procedure on it.
Radiator over flow tank. Done.
The fuel pump, strainer, pigtail connector. DONE
Battery tray. welded in stock replacement.
Sound proofing mat. Have now. Put some in the rear fire wall.
Super charger idler. Bought new.
Belts. Done.
I have lots to trade with. Well maybe not lots.
A complete set of 88 calipers 79 K miles. I can rebuild them if desired. Yes I am licensed aircraft mechanic so i do know what im doing.
A set of 88 front hubs still in the knuckles 79K miles. Spin smooth.
A not so good armrest center console. Cracked where your elbow sits.
A rear tail wing, no stands, slightly warped up on ends.
86 ECM. Good 49K miles. SOLD
86 rear GT calipers. Traded for Grand Am cores.
98 GTP steering column. SOLD
86 4 speed muncie 49K miles with all the cables, shifter, cylinders and hydraulic line. In the mall. SOLD
4 speed console bezel. SOLD
An 88 4 cyl accelerator cable with the double swage. SOLD
86 ford taurus starter. SOLD[This message has been edited by hercimer01 (edited 07-28-2012).]
|
|
|
|
hercimer01
|
JUL 17, 04:30 PM
|
|
|
I sold the8 88 throttle cable.
|
|
|
|
1fatcat
|
JUL 17, 05:52 PM
|
|
|
I've got 2 fuel pumps. One from a 01 silverado 6.0, the other from a 98 blazer 4.3. I have not looked up the specs on them, but they both run high pressure (65psi I think). The pumps are good, they were replaced because of pin holes in the flex tube, which isn't used in the fiero application. Not sure if you want used or not...or how to ship a skinky used pump?
|
|
|
|
hercimer01
|
JUL 17, 08:22 PM
|
|
| quote | Originally posted by 1fatcat:
I've got 2 fuel pumps. One from a 01 silverado 6.0, the other from a 98 blazer 4.3. I have not looked up the specs on them, but they both run high pressure (65psi I think). The pumps are good, they were replaced because of pin holes in the flex tube, which isn't used in the fiero application. Not sure if you want used or not...or how to ship a skinky used pump? |
|
Thanks, but i would really like to go new for the fuel pump. I don't want to have to get in there again or get stranded. Thanks again.
|
|
|
|
1fatcat
|
JUL 17, 08:34 PM
|
|
Totally understandable. I didn't know where you stood with it given the title. 
|
|
|
|
Jfrost
|
JUL 17, 09:17 PM
|
|
Great looking build so far, keep up the good work!
Random question: a guy I work with down here in Normal is originally from the Rockford area and keeps telling me about a guy back home with a few Fieros down the street from him, not sure if thats you or not. His names Antonio Mendoza.
|
|
|
|
hercimer01
|
JUL 17, 10:26 PM
|
|
Thanks!
I keep hearing the same thing, a guy down the street has a few. My name is Allen Warren. I have a Las Vegas Fiero Club sticker on mine.[This message has been edited by hercimer01 (edited 07-17-2011).]
|
|
|
|
Foxy Fiero13
|
JUL 18, 07:00 PM
|
|
|
motor is coming along well i should start building my motor soon my 2.8 isnt enough for me
|
|
|
