Trying to figure out how to replace the 4 fuse caddy that hangs off the fuse box with spare fuses in it. It looks like it should pull straight out looking at my replacement. However my old one that is still hanging from the box (broken) sure doesn't want to come quietly. I am just worried about ~40 year old plastic not doing well if I get too excited prying on something that needs a release pressed or something. Including pictures of the fuse box and the holder in question. Hoping someone here has played this game before successfully.
Vintage-Nut
AUG 21, 09:44 PM
I have not removed it either, however if you remove the two screws holding the fuse block on the dash, you'll see more in your hand....
------------------ Original Owner of a Silver '88 GT Six-Year 'Refurbishment' Nearly Finished...
kingchr
AUG 25, 01:26 AM
For anyone finding thid later, I figured it out. Once you remove the two 7mm bolts that hold the fuse box hinge to the dash and bring it down so you can turn it there is an obvious latch detent holding the crossbar on the spare fuse holder. All you need to do is gently pry the cross bar of the holder up over that detent/shelf and the holder slides off. Just slide the new one in and press firmly and it will slide over the latch and lock in. Then just replace the hinge screws and enjoy knowing you have spare fuses in the car 24/7.