 
     |
| Need help finding a nut size for where the ground strap connects to hinge. (Page 1/1) |
|
Carlin
|
SEP 01, 04:28 PM
|
|
|
Just need the size for the missing bolt to connect a ground strap. Will go to ACE later to buy it.
|
|
|
|
edfiero
|
SEP 10, 02:25 PM
|
|
Not sure, But I can tell you its metric.
|
|
|
|
Vintage-Nut
|
SEP 10, 08:01 PM
|
|
|
Pick a bolt on the block that will fit on the ground strap lug and connects to the chassis.
|
|
|
|
Dennis LaGrua
|
SEP 14, 04:55 PM
|
|
|
The ground must be connected to the chassis and the engine. If the battery ground is not connected to the chassis and engine; when you go to start, the starter will pull all the current though the ECM wiring burning it out. ------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "
|
|
|
|
82-T/A [At Work]
|
SEP 15, 09:33 AM
|
|
| quote | Originally posted by Dennis LaGrua:
The ground must be connected to the chassis and the engine. If the battery ground is not connected to the chassis and engine; when you go to start, the starter will pull all the current though the ECM wiring burning it out.
|
|
Yep... I've seen this. Such an important thing to remember...
|
|
|
|