my power lock installation (Page 1/1)
richard in nc AUG 26, 01:07 PM
i ordered this from amazon https://www.amazon.com/dp/B..._dt_b_fed_asin_title .it works very well.one plus to this is it will work with the fiero lock button.use the wires marked main unit and run the third switch wire to ground.it takes a second but they work.i had to use a relay to make the engine cover to release.i fed power to the white with black stripe wire under the steering collumn.this and the solinold and cover wiring is all you need.that takes about two seconds to open.im very happy i bought this.the link doesn't seem to work.

[This message has been edited by richard in nc (edited 08-26-2025).]

Spadesluck AUG 27, 09:22 AM
Did you are ready have power locks to begin with and then just upgrade with this kit?
richard in nc AUG 27, 01:31 PM
i didn't have power locks before.i bought this kit from amazon but they are out.this looks like the same item. https://www.ebay.com/itm/155720314484
Spadesluck AUG 27, 02:36 PM
I was going to ask how they compare to the stock stuff but you don't have anything to compare them to. Not a bad price though.
richard in nc AUG 27, 07:46 PM
my car came manual windows manual locks.but does have ac and rear defroster.i HAD to add power windows because its impossible to roll up the passenger window from the driver seat.
Dennis LaGrua AUG 29, 11:05 AM

quote
Originally posted by Spadesluck:

I was going to ask how they compare to the stock stuff but you don't have anything to compare them to. Not a bad price though.



Just did the install of the inexpensive aftermarket Chinese power lock kit. As you can imagine; some parts to fit/cut/bend, holes to drill , wiring, cutting, soldering and tapping the fuse center for power. You end up with power locks that work just like stock but without the inside door switches. The power feature only works by using the remote; but still better than manual. When 2 passengers need to get in, its far easier than walking around to unlock or by reaching across from the driver's seat to unlock.. Power locks are IMO a very big convenience. BTW, didn't find the power lead to all the parking lights to hook up that would blink after locking the doors but found a wire where the former back up lights switch was located in the console and used that. When the locks close the backup lights now brink twice.

------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "

[This message has been edited by Dennis LaGrua (edited 09-03-2025).]