 
     |
| Which wheels share the 5x100 bolt pattern? (Page 1/1) |
|
Raydar
|
JUL 21, 11:05 AM
|
|
I see this question from time to time. I just stumbled across this.
Click Me!
Note... It shows the Pontiac Vibe having a 57.1 mm centerbore. I think that's incorrect. It shares the Toyota Matrix hubs, at 54.1 mm.
I didn't notice any other glaring errors or omissions.
You can also look up other patterns, if you feel so inclined. Cool site, all around.[This message has been edited by Raydar (edited 07-21-2025).]
|
|
|
Patrick
|
JUL 21, 03:00 PM
|
|
I was pleasantly surprised when I bought my '98 JDM Subaru WRX STi several years ago, to discover that aftermarket wheels I had bought for my Fiero(s) could be used on the Subie with the appropriate sized hub-centric rings. (The Fiero's hub center bore size 57.1mm is whereas the Subie is 56.1mm.)
|
|
|
|
Dennis LaGrua
|
JUL 21, 05:05 PM
|
|
|
I believe that specifications like rim width, backspace and offset also need to be considered [This message has been edited by Dennis LaGrua (edited 07-21-2025).]
|
|
|
Patrick
|
JUL 21, 05:25 PM
|
|
| quote | Originally posted by Dennis LaGrua:
...specifications like rim width, backspace and offset also need to be considered
|
|
Absolutely.
|
|
|
|
Raydar
|
JUL 21, 05:44 PM
|
|
| quote | Originally posted by Dennis LaGrua:
I believe that specifications like rim width, backspace and offset also need to be considered
|
|
To further elaborate on that, and cut to the chase, it appears that Volkswagen (new) Beetle wheels are perfect (IMHO) for 84-87 Fieros, unless you want to go nuts.
17x7 or 17x8, 35 mm offset. Those will work on either end, will not hit anything, will look good (like not stick out too far), and can be rotated if you choose the same tires for all four.
Of course, if you want staggered, you might have to shop a bit.
Others may differ, depending upon preference.
|
|
|
|