1988 Mera Installing PISA Euro dash. Do I need to fit it before upholstry? (Page 1/1) jrr JUN 19, 10:08 AM Hello - I have an original 1988 MERA. I have the complete Euro Dash Kit from PISA. They no longer come upholstered. I see many pictures online with the raw fiberglass dash installed. My question is can I send it out to be covered (Vinyl probably) and then install it, or do I need to fit it in the car before sending it out? Thank you! JRR IMSA GT JUN 19, 01:30 PM You send it out before installing it. That way they can properly wrap the leather/vinyl around the corners and finish the edges correctly. The ONLY concern is that PISA made the pieces exact to fit so you won't have to do any trimming. Once upholstered, you cannot trim the fiberglass to fit without removing the leather/vinyl. cartercarbaficionado JUN 19, 02:04 PM quote Originally posted by jrr: Hello - I have an original 1988 MERA. I have the complete Euro Dash Kit from PISA. They no longer come upholstered. I see many pictures online with the raw fiberglass dash installed. My question is can I send it out to be covered (Vinyl probably) and then install it, or do I need to fit it in the car before sending it out? Thank you! JRR yes you do. fit it in the car and inspect the fit and do any trimming needed before sending it out Larryinkc JUN 19, 03:36 PM Here's how mine turned out, I spent quite a bit of time getting it ready for upholstery. Sent you a PM. My AC would not cool the car, AC air comes out of the side vents only, here's what I did to fix it. https://www.fiero.nl/forum/Forum2/HTML/146807.html An instrument ground problem showed up several years after I installed, here's my solution. https://www.fiero.nl/forum/Forum2/HTML/146813.html jrr JUN 20, 02:07 PM Larry How do I contact you? The forum did not let me return a Private message. Larryinkc JUN 20, 03:14 PM I sent 2 PMs, info is in first PM.