 
     |
| How can I build an ALDL cable myself? (Page 1/2) |
|
308Fiero
|
MAY 29, 04:17 AM
|
|
I would like to build an ALDL cable by myself, as the shipping costs to Europe are very expensive or US dealers do not ship to the EU......
Unfortunately, I can't find a wiring diagram for the ALDL cable with USB connection. Serial yes, but no guide with USB plug.
The cable plan should cover both baud rates.
Any help is welcome!
|
|
|
Patrick
|
MAY 29, 04:52 AM
|
|
Any help Here?
Also try googling Oliver Scholz.[This message has been edited by Patrick (edited 05-29-2025).]
|
|
|
|
308Fiero
|
MAY 29, 05:05 AM
|
|
| quote | Originally posted by Patrick:
Any help Here?
Also try googling Oliver Scholz.
|
|
Hello, thanks for your answer. The page shows the serial cable connection, bur not the USB connection. That's my problem.
I already check a lot of pages and found only serial solutions.
|
|
|
|
Patrick
|
JUN 02, 06:02 PM
|
|
If you're still looking for info, perhaps contact forum member Romsk and see if he can provide you with any info on the matter.
|
|
|
|
jdv
|
JUN 02, 06:40 PM
|
|
https://www.ebay.com/itm/17...Cl0QJZeJTVUJ2dkmd9K% 2B%2BGin5k0A89qLzEfALIiSgP5U5n6RZSXXZiddCtivF5xhFqTkiwdsDgMduP0EleOcq1y8yxAkFm8MLTk1oR5rURJGOMfBSnrCrL2oja1FZhEytUavcp%2BMqh9GJMx063u2yAxSZkHmXefhqnr99kvK6z4MFhR0RLpRYppwVu1w4nRvkxL6lmdQuWr9213Pyf%2FSxDbog8%2Fb3SWTvcsGqMTAm2sIwaZV9iBXd3%2BsDuiw7Yg%3D%3D%7C tkp%3ABFBMhIe3q-Zl
The Rx and tx leads go to the m spot on the aldl and the ground goes to ground. Make sure the jumper is on 5v. Use tunerpro.net . https://www.gearhead-efi.co...0-ECM-Information-24
|
|
|
|
308Fiero
|
JUL 23, 02:41 PM
|
|
| quote | Originally posted by jdv:
[URL=https://www.ebay.com/itm/176409589117?_skw=TTL-232R+%285V%29+chip&itmmeta=01JWSBDRDPVWD6NCQF36PS74AW&hash=item2912d4b57d:g:Z-EAAOSwUoZkuP2e&itmprp=enc%3AAQAKAAAA8FkggFvd1GGDu0w3yXCmi1f7s9sPQg%2FKVXIb4cD%2FNyn%2B9Z%2FFXwkcsbaeHowauIPgKkOCl0QJZeJTVUJ2dk md9K%]https://www.ebay.com/itm/17...Cl0QJZeJTVUJ2dkmd9K%[/URL] 2B%2BGin5k0A89qLzEfALIiSgP5U5n6RZSXXZiddCtivF5xhFqTkiwdsDgMduP0EleOcq1y8yxAkFm8MLTk1oR5rURJGOMfBSnrCrL2oja1FZhEytUavcp%2BMqh9GJMx063u2yAxSZkHmXefhqnr99kvK6z4MFhR0RLpRYppwVu1w4nRvkxL6lmdQuWr9213Pyf%2FSxDbog8%2Fb3SWTvcsGqMTAm2sIwaZV9iBXd3%2BsDuiw7Yg%3D%3D%7C tkp%3ABFBMhIe3q-Zl
The Rx and tx leads go to the m spot on the aldl and the ground goes to ground. Make sure the jumper is on 5v. Use tunerpro.net . https://www.gearhead-efi.co...0-ECM-Information-24 |
|
Thanks for the advice.
The gearhead link ist restricted, do you have another link?
Do you need any othe files for a 1987 V6?
|
|
|
|
308Fiero
|
AUG 01, 09:20 AM
|
|
| quote | Originally posted by jdv:
[URL=https://www.ebay.com/itm/176409589117?_skw=TTL-232R+%285V%29+chip&itmmeta=01JWSBDRDPVWD6NCQF36PS74AW&hash=item2912d4b57d:g:Z-EAAOSwUoZkuP2e&itmprp=enc%3AAQAKAAAA8FkggFvd1GGDu0w3yXCmi1f7s9sPQg%2FKVXIb4cD%2FNyn%2B9Z%2FFXwkcsbaeHowauIPgKkOCl0QJZeJTVUJ2dk md9K%]https://www.ebay.com/itm/17...Cl0QJZeJTVUJ2dkmd9K%[/URL] 2B%2BGin5k0A89qLzEfALIiSgP5U5n6RZSXXZiddCtivF5xhFqTkiwdsDgMduP0EleOcq1y8yxAkFm8MLTk1oR5rURJGOMfBSnrCrL2oja1FZhEytUavcp%2BMqh9GJMx063u2yAxSZkHmXefhqnr99kvK6z4MFhR0RLpRYppwVu1w4nRvkxL6lmdQuWr9213Pyf%2FSxDbog8%2Fb3SWTvcsGqMTAm2sIwaZV9iBXd3%2BsDuiw7Yg%3D%3D%7C tkp%3ABFBMhIe3q-Zl
The Rx and tx leads go to the m spot on the aldl and the ground goes to ground. Make sure the jumper is on 5v. Use tunerpro.net . https://www.gearhead-efi.co...0-ECM-Information-24 |
|
@jdv
I bought the mentioned adapter and also a "12pin to 16pin" adapter and cut the 16pin connector.
on the 12pin plug are 4 cable
yellow to pin K
green to pin M
red to pin G
black to pin A
Based on the thread of Paul Romsky has the ALDL following pins:
Could you confirm that the data stream comes from ALDL pin M? Means 8192baud? Or from pin E, 160baud?
Based on above picture pin E is the data stream. Or i'm wrong?[This message has been edited by 308Fiero (edited 08-01-2025).]
|
|
|
|
J Gunsett
|
AUG 01, 11:17 AM
|
|
I have one built that I do not use anymore. If you want it just pay postage. I have a problem posting pictures, but Oldjoedad will post one for me.
Jack
|
|
|
|
olejoedad
|
AUG 01, 12:21 PM
|
|
I am posting this photo for JGunsett....
|
|
|
|
jdv
|
AUG 11, 02:10 PM
|
|
|
|
