 
     |
| Fiero Guru brake setup. (Page 1/2) |
|
LS4FieroGuy
|
MAY 02, 11:08 PM
|
|
|
I'm wondering if anyone has the full set of measurements for the caliper spacers on Guru's big brake upgrade. I'm trying to do the upgrade on a tight budget and I know someone who owns a machine shop so I can have all the machining done I just need the measurements. Although before I receive any measurements I would like Guru's permission to make myself a set I just don't know how to contact him directly. ------------------
Joshua Seeger
|
|
|
|
pmbrunelle
|
MAY 03, 12:18 AM
|
|
Part designs like this are not protected by copyright, so while you could do a rip-off of fieroguru's stuff, it would be in better taste for you and your machine shop friend to come up with your own drawings, perhaps inspired by fieroguru.
| quote | Originally posted by LS4FieroGuy:
I would like Guru's permission to make myself a set I just don't know how to contact him directly.
|
|
https://fieroguruperformance.com/?page_id=161
|
|
|
|
LS4FieroGuy
|
MAY 03, 03:05 AM
|
|
| quote | Originally posted by pmbrunelle:
Part designs like this are not protected by copyright, so while you could do a rip-off of fieroguru's stuff, it would be in better taste for you and your machine shop friend to come up with your own drawings, perhaps inspired by fieroguru.
https://fieroguruperformance.com/?page_id=161 |
|
I'm aware there are no copyrights for these designs and this is why I simply am asking for measurements. I'll be designing my own piece based on his design.
|
|
|
|
fieroguru
|
MAY 03, 07:00 AM
|
|
Part designs are intelectual property of Fieroguru Performance LLC and will not be publicly shared.
If you are trying to use my parts on a budget, you could purchase the Hardware Only kit.
Then you can source the rotors and drill them yourself. That saves $325 off the price of the kit.
|
|
|
|
olejoedad
|
MAY 03, 07:55 AM
|
|
| quote | Originally posted by LS4FieroGuy:
I'm wondering if anyone has the full set of measurements for the caliper spacers on Guru's big brake upgrade. I'm trying to do the upgrade on a tight budget and I know someone who owns a machine shop so I can have all the machining done I just need the measurements. Although before I receive any measurements I would like Guru's permission to make myself a set I just don't know how to contact him directly.
|
|
Really?
|
|
|
Vintage-Nut
|
MAY 03, 09:46 AM
|
|
Wow.....I'm astonished with a sense of disbelief!
|
|
|
|
LS4FieroGuy
|
MAY 03, 10:20 PM
|
|
|
I'm new to this type of thing so I don't know what is considered "Taboo" in this circle, I truly do apologize if I offended anyone or ruffled anyone's feathers. I was not intending to steal anyone's intellectual property or anything of that sort.
|
|
|
|
Doggo
|
MAY 03, 10:46 PM
|
|
|
Yeah that’s rough buddy
|
|
|
|
LS4FieroGuy
|
MAY 04, 02:34 PM
|
|
|
|
|
TakeTwo
|
MAY 04, 03:21 PM
|
|
|
This is why vendors left the Fiero community to begin with.
|
|
|
