Rayne/Weld/Arraut/WestShore front coil-over replacement shocks? (Page 1/1)
lou_dias
MAR 19, 01:24 PM
Does anyone have a replacement front shock part #? Summit doesn't seem to let me filter by body diameter or recommended spring inside diameter... I need like a 1.625" or so body diameter adjustable-height shock.
My front shocks are completely shot. New 8" tall 1.875" ID springs I already have. The old springs were reduced to 6"...they were shot too.. :/
I have the Arraut front coilover conversion on my 88. The shocks that it came with are QA1 DS402 with SS110SDM stud top conversion kit.
Hope this helps.
lou_dias
MAR 19, 04:26 PM
Edit: HELD ...not WELD...
Mines is the Slalom kit for the 87 so I don't believe those will work for me. :/ They have a 2" body with a 2.5" ID recommended spring. My spring ID is 1 7/8" ...
On a brighter note they sell this kit to give me a top eyelet which is what I need...so now I can expand the range of shocks to look for... Thanks for the kit #! https://qa1.net/products/qa...kit-ss300lt-ss300lt/
Extra edit:
WestCoast doesn't list specs... However, I'll look into Viking shocks.
[This message has been edited by lou_dias (edited 03-19-2025).]
lou_dias
MAR 19, 09:30 PM
Ok, I downloaded the entire QA1 catalog and found what I need. 8Q53 is 1 5/8" (8Q51 and 8Q52 were also options) CK8Q00 is the kit to hold the 1 7/8" ID spring
