Air cleaner fix or replacement? (Page 1/1)
Filben MAR 09, 07:15 PM
I am doing a 3.4 swap and my air cleaner main body "can" is rusted where the rubber tube to the throttle body connects. Its rotted out about halfway around. I was thinking of going ghetto and using a tin can and JB weld to patch it. Welding it is beyond my skill or budget(this stuff is so thin). A used one is like $100+. Any other options? Are there any new ones being made? Any ideas on a fix that won't suck?

olejoedad MAR 09, 07:16 PM
Well, there's always Gorilla tape.....
Filben MAR 09, 07:59 PM

quote
Originally posted by olejoedad:

Well, there's always Gorilla tape.....



I am seriously considering using a tin can or soda can and JB weld and then cover it in electrical tape. I was really hoping maybe there was some obscure McMaster-Carr chunk of pipe fitting I could order for $6 that can be spot welded on or something.
Stingray92 MAR 09, 08:19 PM
Just my opinion but you can try a tube & sleeve method. I would also go with gorilla tape. Electrical tape while good I don't think would bond well.
Vintage-Nut MAR 09, 08:29 PM
Replacement

Don't forget member Larry Hubbert which sells Fiero parts...


quote
Larry Hubber:
Please PM me directly on here or by direct e-mail at LHUBBERT2@BRIGHTHOUSE.COM or on Facebook Messenger at LARRY HUBBERT / Please include your shipping address as well.

sleek fiero MAR 09, 08:30 PM
Just go to a muffler shop.they have proper pipe and welding skills and equipment to do a nice job of repairing
Dennis LaGrua MAR 10, 05:38 PM
The last air filter housings that we did were for the 3800SC swaps. We cut off the metal exit tube where it connects to the throttle body . We then took a short piece of 3" steel tubing and mig welded it where the old exit tube was located. The modifications lasted but the point is that those air filter boxes can be modified and repaired if the overall metal case is good, If you want a good used air filter box send a message to Wayne Renninger, Tom Derr, Larry Hubbert or Mike Valentine. They may have a good used one..

------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "

[This message has been edited by Dennis LaGrua (edited 03-10-2025).]