HVAC Wiring help (Page 1/1) edfiero DEC 17, 02:54 PM I recently had my interior ripped apart to change the throttle cable. Everything is back together and I discovered the HVAC blower is not working. The actuator is fine. Switching between Vent, Heat, etc is all as it should be, but no blower fan. I pulled the wires off the blower motor and stuck a multi-meter on the wires, and the motor is not getting a signal. What did I FUbar ?? thanks sleek fiero DEC 17, 03:17 PM I would suspect you dislodged the connector on the fan switch. sleek edfiero DEC 18, 08:45 AM quote Originally posted by sleek fiero: I would suspect you dislodged the connector on the fan switch. sleek Thanks. You are correct. Well, 'forgot to reconnect' is more like it. That connector is locked on pretty good. She's working again now.