Upper a/c condensor brackets missing bolts / hardware to radiator support.. Help! (Page 1/1) phils88GT SEP 04, 09:53 PM I have a problem. I am putting the nose back on the front of my 88 GT. I know the car was wrecked at some point in its past, and am finding now missing bolts and harware from a freaking hack job of a "repair". On this reassembly, it appears that the upper condensor support bracket bolts are missing. Not just that, but the hole in the support for a bolt should thread in to is missing the hardware for the bolt to go into. Here is a picture of what I am talking about: Here are the pics in the next post... phils88GT SEP 04, 09:54 PM The holes look like the need some kind of insert... Anyone got any pics of what it is I need? Thanks, Phil cartercarbaficionado SEP 05, 03:56 AM quote Originally posted by phils88GT: I have a problem. I am putting the nose back on the front of my 88 GT. I know the car was wrecked at some point in its past, and am finding now missing bolts and harware from a freaking hack job of a "repair". On this reassembly, it appears that the upper condensor support bracket bolts are missing. Not just that, but the hole in the support for a bolt should thread in to is missing the hardware for the bolt to go into. Here is a picture of what I am talking about: Here are the pics in the next post... it's called a wellnut. it's a rubber plug with threads in it. ace hardware should have them jibby212 SEP 05, 07:11 AM Yes, well nuts for 6mm bolt, i just ordered a 20 pack off ebay. 82-T/A [At Work] SEP 05, 08:22 PM quote Originally posted by phils88GT: I have a problem. I am putting the nose back on the front of my 88 GT. I know the car was wrecked at some point in its past, and am finding now missing bolts and harware from a freaking hack job of a "repair". On this reassembly, it appears that the upper condensor support bracket bolts are missing. Not just that, but the hole in the support for a bolt should thread in to is missing the hardware for the bolt to go into. Here is a picture of what I am talking about: Here are the pics in the next post... Fiero Store has the original hardware kit, everything you need: https://www.fierostore.com/...px?s=88174&d=156&p=1 olejoedad SEP 05, 10:59 PM They are available at any hardware store for about 50¢ each.... Support your local businesses! phils88GT SEP 05, 11:06 PM Thanks everyone for the info. I actually ended up just installing some nutcerts and using them. I think I spent about three hours today tweaking and straightening the lower radiator support on my GT. I still would rather just buy a new (good used) one as mine was over tweaked by a previous wreck anyway. Tomorrow I move on to trying to heat up and get the dips out of my front bumper cover. I wish someone made a fiberglass aero verion that fit well and had foglight provisions. Thanks again! cartercarbaficionado SEP 06, 12:10 AM quote Originally posted by phils88GT: Thanks everyone for the info. I actually ended up just installing some nutcerts and using them. I think I spent about three hours today tweaking and straightening the lower radiator support on my GT. I still would rather just buy a new (good used) one as mine was over tweaked by a previous wreck anyway. Tomorrow I move on to trying to heat up and get the dips out of my front bumper cover. I wish someone made a fiberglass aero verion that fit well and had foglight provisions. Thanks again! haha...about that... I know where one is but I'm not sure if he wants to make the bumper for someone else.