1988 Upper Control Arm Pivot Bolt Torque (Page 1/1)
yostra
NOV 30, 11:53 AM
None of the service manuals (including the factory manual) I've searched list a torque spec for the nuts on the end of the UCA spindle. It looks like the assumption is that the bushings are non serviceable. What do folks use when replacing the bushings on an '88?
Gall757
DEC 01, 07:38 PM
pivot bolt? Ya,,,,,nobody thought those bushings would wear out, let alone that a car owner would try to fix them.
[This message has been edited by Gall757 (edited 12-01-2021).]
