|
Lower intake stud (4) size (Page 1/1) |
|
SemperFi18
|
APR 18, 10:43 PM
|
|
|
|
Patrick
|
APR 18, 11:01 PM
|
|
quote | Originally posted by SemperFi18:
20210407_052458021.j pg
|
|
Edit the space out of your third image link.
I see this same issue occurring over and over again here. I suspect it's the result of image links being posted with no line gap (using the Enter key) between links.[This message has been edited by Patrick (edited 04-18-2021).]
|
|
|
SemperFi18
|
APR 18, 11:18 PM
|
|
Every time I take the space out out comes back, it only does it to the last image though. So I just added it again
|
|
|
Patrick
|
APR 19, 12:00 AM
|
|
quote | Originally posted by SemperFi18:
Every time I take the space out out comes back, it only does it to the last image though.
|
|
As I demonstrated (and since deleted), it'll work if the Enter key is used between image links.[This message has been edited by Patrick (edited 04-19-2021).]
|
|
|
SemperFi18
|
APR 19, 01:51 AM
|
|
Do you know the stud size?
|
|
|
Notorio
|
APR 22, 12:30 AM
|
|
quote | Originally posted by SemperFi18:
Do you know the stud size? |
|
You are right, they are the same thread as the exhaust manifold. The two short studs are 7 cm and the two long studs are 8 cm. The long ones go on the distributor side.
|
|
|