Replacing Power Window Motors (Page 1/1)
imacflier JUN 30, 01:23 PM
Good Afternoon, All,

I am going to replace my power window motors with Rodney's really fast motors.

I searched and found the really excellent thread by josef644.

My question is pretty simple: is it easier to do the replacement with both the inner panel AND the door skin off?

TIA

Larry
fierosound JUN 30, 05:57 PM
I replaced all my motors on both my cars.
I only removed inner door panels to do them.
That's enough work as it is...

------------------
My World of Wheels Winners (Click on links below)

3.4L Supercharged 87 GT and Super Duty 4 Indy #163

imacflier JUN 30, 08:01 PM
fierosound

Thanks for the advice....I thought maybe I would save enough time on the motors and regulators to justify pulling the door skin as well.


Larry
Spadesluck JUL 01, 06:09 PM
Just like mentioned above, the inside door panel is all you need to take off to get to the motors. Now if there is more going on, these cars are old, you can take the outer door skin off as well to better access everything. That is not very hard to do either.