Can someone tell me how to remove the aero molding on the front fenders behind the wheels? I understand how to unclip the rocker and how to remove the rear quarter panel moldings above it but I'm stumped on removing front molding and I don't want to break anything by experimenting. (Parts be hard to find in Oz!) Do I have to remove the entire fender?
------------------ Mike in Sydney
olejoedad
APR 15, 07:47 AM
Pull the wheel well liner to access the pushnuts holding the mounting bracket for the trim.
fierofool
APR 15, 10:37 AM
I have been successful in using a very long and thin flat blade screwdriver. Insert the tip into the slots on the fasteners and give a twist to bend the tangs away from the tab. Rotate the fastener and do it again and again. Eventually, you can get it loose enough that it will pop off. That front one is really a bugger.
