Lx9 , Lz9, LZE. Engine install question (Page 1/1) PAUL66 FEB 08, 10:48 PM I am doing a LZE swap into my 88 GT . I have the engine, done a ton of research and have enlisted Ryan at sinister to build my pin out and ECM programming. The question I have not see. Any good information on is moving the torque strut. I am keeping the alternator in its engine original spot so I have to move the strut. Does anyone have any solid pictures of how they made the bracket that attaches to the head. I have some ideas but I would like to see what others have done. I would appreciate any intel I can get. Paul eph_kay FEB 17, 12:06 PM I really wanted to post up some pictures, but I will have to get some of what I have done on the 3500/3900 installs I have done. Sadly I have low mounted the alternator on all of the installs I have done, it just saves you from notching the decklid. But it can give you an idea of how I made it work. Chris