 
     |
| Question about installing a new Iron Duke cat back exhaust from the Fiero Store (Page 1/1) |
|
Curlrup
|
OCT 20, 03:56 PM
|
|
|
Hey folks!!! Wow I have been away for a while. My 88 iron duke FIero that I have driven a lot the last 8 years finally had the exhaust rot enough to crack off right by the bend after the CAT. Going to get a new system from the Fiero store. Question is...Can I fish that in there without dropping the cradle? I've dropped it before many times, but really don't want to do it again if I don;t have to. Thanks guys! Good to be back.
|
|
|
|
fierosound
|
OCT 20, 04:09 PM
|
|
|
|
|
Curlrup
|
OCT 20, 04:15 PM
|
|
I don't remember. It's been a long time since I really looked at. It's raining right now. I'm assuming if 84 through 87 goes under and fiero store sells a stock exhaust for 84 to 88 then 88 does the same.
| quote | Originally posted by fierosound:
The exhaust is below the cradle as on 84-87 models is it not?
|
|
|
|
|
|
Dennis LaGrua
|
OCT 20, 07:05 PM
|
|
Its not a hard install but first you must determine if the CAT is not clogged (a common problem) If it is you'll need a new CAT to replace it. If you need to retain the stock look for your area (and the case is good), then just hollow out/gut the existing cat with a long lug wrench or tire iron. This saves a lot of money and keeps the bureaucrats happy.
------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE " [This message has been edited by Dennis LaGrua (edited 10-20-2019).]
|
|
|
|
