 
     |
| Need a name for this part and possibly where to get one (Page 1/1) |
|
Jasperr
|
OCT 06, 05:54 PM
|
|
https://imgur.com/Rjw59Ar
My new project, a '85 SE. These two bars that attach behind the bumper. Fellas in pretty poor shape and I'm wondering if there's anywhere I can get them (shy of pulling from another car of course) Thanks!
|
|
|
|
AsaBergman
|
OCT 06, 06:19 PM
|
|
Welcome.
I've seen those two bars called cross braces, forward supports, skid bars(?). There's no replacements so you'd either pull them off another Fiero or make new ones. If they're not rotted just take them off, sandblast or wire wheel and paint them.
|
|
|
|
RWDPLZ
|
OCT 06, 06:58 PM
|
|
|
|
|
fierosound
|
OCT 06, 07:16 PM
|
|
|
|
|
cvxjet
|
OCT 06, 09:20 PM
|
|
|
I bought the RD ones because I needed more clearance for my stabilizer bar mounting system- They are well made and a good price....
|
|
|
Jasperr
|
OCT 06, 09:58 PM
|
|
Thanks guys. New they had to be out there somewhere just couldn't figure out the right name to call them searching around.
And yea they need more than just a brushing the driver side one practically has a hole in it from some bad rusting.[This message has been edited by Jasperr (edited 10-06-2019).]
|
|
|
|
82-T/A [At Work]
|
OCT 06, 10:22 PM
|
|
|
I remember these, these always get damaged. Years ago, I had to go through 3 Fieros in the junkyard before I could find a pair that was decent enough that I could sand down and paint... and that weren't all bent and damaged.
|
|
|
|
sledcaddie
|
OCT 08, 09:09 PM
|
|
|
The ones I bought from the Fiero Store are beefier than the stock ones. Excellent welds! And powder coated, to boot!
|
|
|
|
Neils88
|
OCT 08, 09:32 PM
|
|
Did the 88s come with these? I don't remember ever seeing these when I dismantled my front end. 
|
|
|
|
olejoedad
|
OCT 08, 09:44 PM
|
|
|
No, the 88 front crossmember is a much different design than the earlier years.
|
|
|
