 
     |
| Fiero lights keep burning tail Fuse (Page 1/1) |
|
Firezappy
|
AUG 28, 10:56 PM
|
|
|
Hello, I have a 1988 2.5 Fiero. My dash lights went out, and my headlights won't go down. If I put a TAIL fuse in the lights go down, then immediately burn the Tail fuse. Any hints as to what to do?
|
|
|
|
theogre
|
AUG 29, 02:37 AM
|
|
unplug HL module. Might reach from bottom but likely need remove screw holding left inner fender. try again.
See my Cave, Gen 2 HL Motor
still blows then wiring to the module or problems w/ back of car.
Stop when unplug the module...
Module, motor(s) and/or wires between them have problems.------------------
Dr. Ian Malcolm: Yeah, but your scientists were so preoccupied with whether or not they could, they didn't stop to think if they should.
(Jurassic Park)
The Ogre's Fiero Cave
|
|
|
|
Firezappy
|
AUG 29, 09:36 AM
|
|
|
I remembered that a while ago I installed an fm transmitter behind the radio so that I had an aux in cable. It decided to self destruct causing a dead short. So once I removed it all is normal. But thank you for the quick response!
|
|
|
|