 
     |
| O-ring for throttle body 2.8 (Page 1/1) |
|
go faster
|
AUG 28, 07:04 PM
|
|
|
Working on vacuum leaks would like to know the size of the o-ring for large metal line at the bottom of the throttle body. Did a check with smoke and had some smoke leaking from that line. Any help would be great. Did a search no information was available.
|
|
|
fierosound
|
AUG 28, 07:28 PM
|
|
P22 Parts book...
3.336 O-ring, vacuum tube PN 10039067
There's nothing special about it though.
You can take it out and match it up to a regular black o-ring (most likely a metric size)------------------
My World of Wheels Winners (Click on links below)
3.4L Supercharged 87 GT and Super Duty 4 Indy #163
|
|
|
|
go faster
|
AUG 28, 07:32 PM
|
|
|
Thanks a bunch. Will try that.
|
|
|
|
go faster
|
AUG 28, 07:43 PM
|
|
|
Thanks a bunch. Will try that.
|
|
|
|
tazome
|
AUG 29, 02:01 PM
|
|
just replaced mine  ) i got a box of metric orings from harbor frieght, alot of people forger to replace that one along with the line under the plentum, replace those plastic line with the stainless metal ones , you would be surprised how brittle the are
|
|
|
go faster
|
AUG 29, 02:37 PM
|
|
|
I did that but the car was down. Ready to get it back on the road if all the vacuum leaks are sealed.
|
|
|
|
fierofool
|
AUG 29, 06:15 PM
|
|
|
I just sent an O-ring to a fellow club member. The inside diameter of the ring is 0.543 inches and the thickness of the ring is 0.10 inches.
|
|
|
