 
     |
| Can you point me in the direction of an odb 1 scanner (Page 1/2) |
|
Fiero Thomas
|
JUN 02, 06:40 PM
|
|
|
|
George P Wood
|
JUN 03, 12:04 AM
|
|
|
|
|
theogre
|
JUN 03, 12:12 AM
|
|
reddevilriver.com is pff member and has a few versions and cheap.
OBD1 should save all codes even w/ engine off unless you reset the ECM or ECM has problems or crap reset wire in engine bay.
Capture data may not tell you anything w/o knowing what is normal etc. See my Cave, Scan Tool Help and others.
Scan for codes before shutdown might help or not.
Note: Scanning causes issues itself like higher idle because ECM does not like "multitasking" trying to run the car and stream data to read.
------------------
Dr. Ian Malcolm: Yeah, but your scientists were so preoccupied with whether or not they could, they didn't stop to think if they should.
(Jurassic Park)
The Ogre's Fiero Cave[This message has been edited by theogre (edited 06-03-2019).]
|
|
|
|
theogre
|
JUN 03, 12:14 AM
|
|
| quote | Originally posted by George P Wood:
How about this one:
[URL=https://www.amazon.com/INNOVA-3123-OBD1-Code-Reader/dp/B000EVU8C0/ref=asc_df_B000EVU8C0/?tag=hyprod-20&linkCode=df0&hvadid=312065537890&hvpos=1o1&hvnetw=g&hvrand=5528364716847513740&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1027519&h vtarg]https://www.amazon.com/INNO...ocphy=1027519&hvtarg[/URL] id=pla-433883705022&psc=1 |
|
Is nothing but a paperclip to read "codes" on dash IOW crap.
|
|
|
|
darbysan
|
JUN 03, 10:49 AM
|
|
I've used the Bluetooth OBD1 from RedDevil, and although it is a little glitchy at times, it did the job for me. I was able to use it real time while driving to read the BLM and INT numbers to get my Fuel Injection properly programmed on my El Camino project. Works well with an Android phone ( or in my case an Android Radio) and ALDLdroid app. Just expect some disconnects.
You can also use an OBD1 cable connected to a laptop, and use TunerPro RT software to do the same thing. Pre-made cables are available from Reddevil, or online. ------------------
'87 GT , '00 3800 Series II SC, 4t65e, Vue Power Steering. (SOLD)
|
|
|
|
Fiero Thomas
|
JUN 03, 05:35 PM
|
|
|
|
|
Dennis LaGrua
|
JUN 03, 05:53 PM
|
|
| quote | Originally posted by Fiero Thomas:
Thank you all for the heads up. I have looked that the stuff provided and think I am going to goo with this scanner
https://www.ebay.com/itm/OT...p2060353.m1438.l2649
When I get it I will let you guys know how it goes.
|
|
That doesn't have the cartridge for the GM cars 1984-1990. . Probably won't scan . Try to find an Actron CP-9110 scan Tool with the 1984-1990 GM cartridge. This is the scan tool that we use.
------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "
|
|
|
RWDPLZ
|
JUN 03, 06:28 PM
|
|
|
|
|
Blacktree
|
JUN 03, 06:36 PM
|
|
|
I have the OTC 2000 scanner mentioned above. It's definitely dated, but works fine with the stock Fiero ECMs (including the 87-88 Duke). I'm actually thinking of selling it, because I don't have any use for it anymore.
|
|
|
|
Fiero Thomas
|
JUN 03, 06:37 PM
|
|
| quote | Originally posted by Blacktree:
I have the OTC 2000 scanner mentioned above. It's definitely dated, but works fine with the stock Fiero ECMs (including the 87-88 Duke). I'm actually thinking of selling it, because I don't have any use for it anymore. |
|
How much?
|
|
|
|
