fuel level gauge wire diagram (Page 1/1) La fiera MAY 02, 12:38 PM Can anybody provide me with a wire diagram for the fuel level signal (pink) wire? I'm installing an aftermarket gauge and need to see where is the best place to get the signal from. Thanks! Rei olejoedad MAY 02, 02:17 PM You need to tap in to the dash connector on the passenger side of the cluster. Wire #7 La fiera MAY 02, 03:15 PM quote Originally posted by olejoedad: You need to tap in to the dash connector on the passenger side of the cluster. Wire #7 Thanks Olejoedad!! olejoedad MAY 02, 03:25 PM Be aware that the GM sender is 0-90Ω, most aftermarket gages do not interface to the GM sending unit. La fiera MAY 03, 09:33 AM quote Originally posted by olejoedad: Be aware that the GM sender is 0-90Ω, most aftermarket gages do not interface to the GM sending unit. Yes, that I know. I purchased a VDO 0-90ohms. Thanks buddy! olejoedad MAY 03, 10:36 AM Always happy to help. Good luck with your project.