what year S10 booster (Page 1/1)
Lou6t4gto APR 16, 01:49 PM
Brakes, what Year S10/blazer BOOSTER is needed for the swap ? I know 1996 fits, but what other years? Thanks
longjonsilver APR 16, 03:07 PM
i believe mine came from a GMC Sonoma 1995. Made a HUGE difference, i got good brakes now.
jon

------------------
Astronomy says we will find a coded signal from outer space. Then we'll KNOW that life exists there, for coded signals aren't by chance.

Biology says there are coded genetic signals in every cell, but we KNOW that no intelligence created life.

I'm the original owner of a white ' 84 2M4 purchased Dec 10, 1983 from Pontiac. Always garaged, no rust, 4-wheel drifts are fun!

Dennis LaGrua APR 16, 07:30 PM

quote
Originally posted by Lou6t4gto:

Brakes, what Year S10/blazer BOOSTER is needed for the swap ? I know 1996 fits, but what other years? Thanks



Why use other year boosters when the brake Booster for 96 Chevrolet S-10 2 wheel dr. fits. Below are the part numbers. They might fit other vehicles.

Cardone 54-71061 Summit 760125 *Tough Stuff 2232N Kit *only one that can be directly used with Rodney Dickmans adapter end.
Cut off Fiero Rod 4.312” Long Thread 3/8-16 threads
Cut S-10 booster rod at banjo hole. Thread S-10 Cylinder rod 1.5” Long.
Use threaded longnut to attach rods together.
Extend actuator Rod to 9 3/8” Body to Center hole measurement use. Use nuts to tighten in place using Locktite
Use Fiero bracket

I used the Tuff Stuff booster with Rodney Dickmans adapter end. You can also buy a completed unit from Sardonix on this forum. These choices are nearly plug and play only because a small amount of space must be opened up for the larger booster to fit. One of the best effective inexpensive mods that I've ever made.


------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "

Lou6t4gto APR 21, 01:55 PM
"Why use other year boosters when the brake Booster for 96 Chevrolet S-10 2 wheel dr. fits"
Simple,because a NEW 1996 booster costs $150, any other year that "Also fits" can be had for $35 "delivered" USED and still looking good.
Dennis LaGrua APR 21, 04:37 PM

quote
Originally posted by Lou6t4gto:

"Why use other year boosters when the brake Booster for 96 Chevrolet S-10 2 wheel dr. fits"
Simple,because a NEW 1996 booster costs $150, any other year that "Also fits" can be had for $35 "delivered" USED and still looking good.



I doubt if other year GM boosters would fit as well Don't know of any "also fits" units You can get a rebuilt Cardone S-10 on Amazon for $86. If you are talking about a $35 brake booster delivered that cheap a price usually signals no brand Chinese. You are only going to do this mod once so even the total unit shouldn't be more than $120. BTW, whats your Fiero worth?

------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "

Lou6t4gto APR 21, 11:24 PM
I always use USED "warranteed used GM boosters". I've NEVER had a booster go bad in 40 years
Threedog APR 25, 11:16 AM
I was under the impression that this was a great booster to use as already has the correct/close to correct rod. A while back I was referred to it. Can anyone comment on if this is accurate?
Spadesluck APR 25, 12:22 PM

quote
Originally posted by Threedog:

I was under the impression that this was a great booster to use as already has the correct/close to correct rod. A while back I was referred to it. Can anyone comment on if this is accurate?



That is the correct booster but I still believe you need to change the rod out. Rodney's site even links that booster for his kit.
Dennis LaGrua APR 25, 06:01 PM

quote
Originally posted by Spadesluck:


That is the correct booster but I still believe you need to change the rod out. Rodney's site even links that booster for his kit.



That's Rodneys rod end that extends the actuator rod to the correct length on the Tuff Stuff (Hurst) booster.

------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "