Will this work to fill old wing holes? (Page 1/1) DanFiero APR 04, 12:25 PM I'm adjusting some things on my rear deck lid and need to fill a couple unused wing holes and was wondering if this product will work well and bond with the SMC panel? https://www.eastwood.com/us...qEAQYAiABEgIKD_D_BwE Thanks, Dan Gall757 APR 04, 04:13 PM Probably.. rough up the surface around the hole a LOT....make a divot so the filler has a larger surface to grab on to. A small bit of glass fabric in the divot would be best. FX APR 05, 03:27 PM If you're not gonna paint for a while, I used license plate bolts with chrome caps on my GT to fill in the holes till I put the wing back on. It looked pretty good... Bob