
 |
| Windshield washer during hard cornering (Page 1/2) |
|
st88fiero
|
JUL 28, 12:17 PM
|
|
I did search on this and did not see anything, so if it has been discussed before my apologies.
My 86gt used to do this same thing, when driving aggressively around turns (mostly right turns) my windshield washer lets out some fluid. I never had this in an 86se i used to own. Now I see it in the new 88gt I have so I am assuming that it a common problem. Is there a cure?
|
|
|
crashyoung
|
JUL 28, 12:45 PM
|
|
My 86 also does it. It is the remaining fluid in the lines that comes out because of centrifugal force. Irritating, but normal.
|
|
|
theogre
|
JUL 28, 03:14 PM
|
|
| quote | Originally posted by crashyoung: My 86 also does it. It is the remaining fluid in the lines that comes out because of centrifugal force. Irritating, but normal. |
|
Yes, cause when check valve is good.------------------ Dr. Ian Malcolm: Yeah, but your scientists were so preoccupied with whether or not they could, they didn't stop to think if they should. (Jurassic Park)
The Ogre's Fiero Cave (It's also at the top and bottom of every forum page...)
|
|
|
92wastheyear
|
JUL 28, 06:39 PM
|
|
| quote | Originally posted by st88fiero:
....when driving aggressively around turns (mostly right turns) my windshield washer lets out some fluid. |
|
This used to happen to my passengers occasionally....but never the windshield washer
|
|
|
jazz4cash
|
JUL 28, 08:27 PM
|
|
|
Funny, when I was getting ready to go to the 30th, I realized PO had put a "fix" on my washer resevoir. I had noticed the blue stain around the cap, but never saw any liquid there. I happened to notice that a cap (like the ones on a tube of caulk) had been RTV'd to the underside of my resevoir cap. over the vent hole. The caulk tube cap had a vent hole in the side making it difficult for any liquid to splash out of the top.
|
|
|
fierofool
|
JUL 28, 09:46 PM
|
|
At Run For The Hills, when the washer squirts in a sharp curve is how you know you're having fun. When you squirt, you know you've had too much fun
|
|
|
Kevin87FieroGT
|
JUL 28, 11:42 PM
|
|
| quote | Originally posted by jazz4cash:
Funny, when I was getting ready to go to the 30th, I realized PO had put a "fix" on my washer resevoir. I had noticed the blue stain around the cap, but never saw any liquid there. I happened to notice that a cap (like the ones on a tube of caulk) had been RTV'd to the underside of my resevoir cap. over the vent hole. The caulk tube cap had a vent hole in the side making it difficult for any liquid to splash out of the top. |
|
Great idea!!
|
|
|
Brian A
|
AUG 14, 10:35 AM
|
|
Reviving a 13-year-old thread ...
Has anyone ever figured out how to stop windshield washer fluid from squirting onto the windshield during hard cornering?
My solution has been to drain the windshield washer fluid tank.
It would be nice to have fluid to clean the windshield as designed.
|
|
|
82-T/A [At Work]
|
AUG 14, 02:26 PM
|
|
| quote | Originally posted by Brian A:
Reviving a 13-year-old thread ...
Has anyone ever figured out how to stop windshield washer fluid from squirting onto the windshield during hard cornering?
My solution has been to drain the windshield washer fluid tank.
It would be nice to have fluid to clean the windshield as designed. |
|
Just checked the windshield washer tank. I bought a new one from the Fiero Store for my daughter's car, and it came with a breathable gasket that completely covers the underside of the cap, physically blocking the expansion hole at the top. I'm wondering if possible you are missing the gasket. Like you posted in the other thread, I've definitely had coolant sneak out the overflow tank, but never had it come out this washer tank... and it's completely full. See if you have a functional gasket in there.
|
|
|
Brian A
|
AUG 14, 06:42 PM
|
|
| quote | Originally posted by 82-T/A [At Work]: Just checked the windshield washer tank. I bought a new one from the Fiero Store for my daughter's car, and it came with a breathable gasket that completely covers the underside of the cap, physically blocking the expansion hole at the top. I'm wondering if possible you are missing the gasket. Like you posted in the other thread, I've definitely had coolant sneak out the overflow tank, but never had it come out this washer tank... and it's completely full. See if you have a functional gasket in there. |
|
Actually, it's a different problem: it is the nozzles pointed at the windshield that will spit a little bit of liquid onto the windshield. It's not that the reservoir is spilling.
I have never heard of any other car doing this. Presumably it is a design problem; the tubing is routed weird or the outlet from the tank is in the wrong place or something.
|
|

 |