Project 3400 Roller Cam Block (Page 81/82)
La fiera JUL 07, 07:15 PM

quote
Originally posted by lou_dias:

Not sure if you all saw my races from yesterday in the 'General' section: https://www.fiero.nl/forum/Forum1/HTML/100749.html


Lots of work to do and less than a month to do it in.



Do they allow you to align it anyway you want? Looks very quick!

lou_dias JUL 09, 04:42 PM
Not exactly ... also you do need glass on the passenger window but not the driver's side. We used to have to have all the windows rolled up.
lou_dias AUG 02, 06:35 PM
Electric exhaust cut-out installed.
No tune yet. Race tomorrow.

I'll try to do another tuning session within 2 weeks...hopefully don't go too lean up top in the meantime.
lou_dias AUG 04, 09:20 AM
Not a good day.

I had some friends over replacing my clutch line in my Formula while I was adding makeshift fender flares to the front of my race car.
I took one of them for a joy ride to gas up the car.
I forgot to bring the octane booster with me and told myself to add it when we got back.

Yeah that never happened.
I was running short on time getting to the track when I realized that never happened and the car started throwing a code but it went away.

I had no power in the back straightaway in the firs race...it was pulling serious timing. 20 second lap. Prior to that car stalled when I revved it up getting to the line.... It eventually hard-started.
I think my lap time in the 2nd race was only better because I pushed it in turn 4... Power would drop and surge.

Limped it home. Constant code during the first race and thru the entire drive home.
Me and the girl had plans so I didn't get to pull the codes yet. Ugh.

https://www.youtube.com/watch?v=1N0rawJUR1k

Oh and the stress made me totally forget to engage the exhaust cutout...

[This message has been edited by lou_dias (edited 08-04-2024).]

lou_dias AUG 04, 02:04 PM
Code 35 for the IAC I expected...

41, 43 and 54.

43 is knock sensor,
54 is fuel pump...which explains the surging and dying

41 is ICM

The ICM was fairly solid mounted before but now has play...It probably needs to be tightened down better...
lou_dias AUG 14, 07:10 PM
I've replaced the ICM and plugs. Now the only codes I get are 35 as expected and 42.. I am trying to determine if it's a bad wire or a bad ICM. It was a $35 Amazon special so...
I disconnected and reconnected the plug 3 as diagrammed in the link below - it did run temporarily with no code 42 and the engine revved great. I turned it off and went back inside and told my tuner I'd be driving over after all. I restarted the car and it came back. I'll play with wires some more this weekend and perhaps order another ICM as this one may simply be faulty.

https://easyautodiagnostics...crank-sensor?start=1
lou_dias AUG 18, 12:48 PM


Got the car running Friday night with no codes. Raced yesterday.
1st race, beautiful LS3 swapped Monte Carlo but he was on street tires so he never had a chance. I was testing my launch at 2200rpm. That seemed to work well. I cruised after turn 2.

Did it again for the 2nd race I knew it would be tough. Me and this Camaro are historically side-by-side in turn 3. I felt he is faster this year than before. Well, I launched well again.
I think this ICM really helped me compared to the old one which would spike and dive my a/f ratio. I guess I am making more power because what I thought was a fluke 2 weeks ago happened again. I hit 7500 rpm before the half-way point of the back straightaway.

I was shocked that I had to shift into 3rd. By the time I realized this he started to pass me. Then in turn 4, I backed off a little to get to his inside and then punched it. I guess maybe I didn't back off enough or punched to hard instead of easing into it because that made me do the 180... Still I was very pleased with the fact that the car has the potential to beat arguably the best Camaro there.

Earlier in the season, I was winding out to turn 3. That was always the calculated plan that's why I wasn't thinking of shifting. I guess I'm pushing it more in turn 2... I'll have to remember this for the last 3 races of the season. Sadly I won't be able to fix my suspension issues until next season. The car looked wobbly when I shifted into 3rd prior to turn 3.

Once again the problem is mostly the loose nut behind the wheel.

https://rumble.com/v5bfyh1-vs-ls3-monte-ss.html

https://rumble.com/v5bfz7t-...ieldings-camaro.html

[This message has been edited by lou_dias (edited 08-18-2024).]

lou_dias AUG 21, 05:05 PM
Update. I blew the heater core without using the heat. Should have it ready for tuning for next week.
lou_dias AUG 30, 05:05 PM
Pics to follow this weekend...

Went to the dyno last night. Did a base run to look at the changes I made after not feeling completely comfortable with the last dyno in June...
We calibrated my rpm by speed by setting 2000rpm on the dyno. Once done, I got a smoother graph that shows RPM instead of speed.

Turns out that me backing off about 1.5 degrees up top and slightly over the course of the rpm range as well as removing some fuel by targeting 13.5 in the low-to-mid range really helped! I had left the 12.5 target up top.
However, with better timing, the misses, or rather detonation became more pronounced up top from 4600 on up. As a result - I didn't gain any peak horsepower.

I did gain torque. I now make 230 ft*lbs at 4100 rpm. That's +20 ft-lbs! Same horse power of 209 due to the fuel/iginition/timing issues up top. That's kinda insane!

We then did a run with my exhaust cut-out open. While I lost 2 ft*lbs at peak. I gained 2 peak rwhp to 211. However I gained 10 hp past peak so it is useful for +5000rpm...if only then.

After that, we set timing to +26 (+base 10). We also removed a little bit of efficiency from the VE table from 4600 and up.

I start my car and immediately code 41 comes on. We replaced the crank sensor and checked the connections and still it wouldn't go away. It had come on earlier in the week when I had the heater core replaced but had gone away. Had to end the day there. I bought a new, this time - expensive - ICM. This one does come with thermal paste so perhaps that's what killed my new ICM early and the current one did not. I had to leave the car at the dyno shop.

I'm going there tonight to swap the ICM. No time for a dyno run. I have to drive it home (if the new ICM cures the issue) and race tomorrow.
lou_dias AUG 30, 05:10 PM
Also, I want to give a huge shout out to Rei aka La Fiera for providing me the parts I needed for this build. He designed my cam profile and sources the internal components I needed for the short block as well as my bigger valves and springs.

Incase no-one recognized it - I am running his old intake from several years ago as well. I have been sitting on it for like 3 years waiting for this build.